21
P-120/P-120S
19
The Effect
To select an effect type press the
[EFFECT]
button a few times until
the indicator corresponding to the desired type lights (the indicators
light in sequence each time the
[EFFECT]
button is pressed). No effect
is produced when all indicators are off.
OFF
No effect is selected when no EFFECT indicator is lit.
CHORUS
Shimmering, broadening effect
PHASER
Adds a sweeping effect to the sound.
TREMOLO
Tremolo effect
DELAY
Echo effect
• The default effect type (including OFF) and depth settings are different for
each voice.
Adjusting Effect Depth
........................................
Effect depth can be individually adjusted for the selected voice
by using the
[–/NO
▼
]
and
[+/YES
▲
]
buttons while holding the
[EFFECT]
button. The depth range is from 0 through 20 (the
current depth setting appears on the LED display while the
[EFFECT]
button is held). A setting of “0” produces no effect,
while a setting of “20” produces maximum effect depth. Press the
[–/NO
▼
]
and
[+/YES
▲
]
buttons simultaneously while holding
the
[EFFECT]
button to recall the default setting for the current
voice (the default depth settings are different for each voice).
The
[EFFECT]
button allows you to select one of the effects that can give your
sound greater depth and animation.
NOTE
