P-250
63
Settings for Song Recording and Playback [SONG SETTING]
Edit Operation
■
Auditioning channel [ChannelListen]
You can select a single channel to listen to its contents.
Playback starts from the first note.
Press the D [–]/[+] buttons to select a channel for play-
back. Press and hold down the B [+(YES)] button to play
the channel.
■
Deleting data from a channel [ChannelClear]
You can delete data from the 16 channels one by one or
all together.
Press the D [–]/[+] buttons to select a channel to delete,
and press the B [+(YES)] button to delete the data.
■
Specifying the range and playing back
repeatedly [FromToRepeat]
You can specify a range (in steps of beats) that you wish
to play back repeatedly.
• Playback repeats after it reaches the end point. (The
end point is not played.)
• If you start playing back a song with “Repeat On”
selected, the count down starts, followed by the
repeated playback of the specified part until you
press the [TOP] button.
• If you select “Repeat Off,” normal playback starts.
Press the B [–(NO)]/[+(YES)] buttons to select “Repeat
On” or “Repeat Off.” Press the C [–]/[+] buttons to spec-
ify the start point of the repeated range, and press the D
[–]/[+] buttons to specify the end point of the repeated
range.
■
Specifying a phrase for playback by phrase
number [PhraseMark]
If you select a song that contains “PhraseMark” data you
can specify phrase numbers to play back from the mark
point, or to play back repeatedly.
• If you start playing back a song with “Repeat On”
selected, the metronome sound starts ticking, fol-
lowed by the repeated playback of the specified
phrase until you press the [TOP] button.
• If you select “Repeat Off,” normal playback starts
from the specified phrase.
Press the C [–]/[+] buttons to specify a phrase number,
and press the B [–(NO)]/[+(YES)] buttons to select
“Repeat On” or “Repeat Off.”
You can set the phrase number to Off (not specified), or
from 1 through the last phrase number in the song.
• If you select a song that doesn’t contain “Phrase-
Mark” data, you can select only “Off”.
• Refer to page 61 for general information on setting the parameters.
• Refer to pages 3—5 of the separate “Data List” for information on the default parame-
ter settings.
TIP
Channels that do not contain any data are not displayed.
However, for some songs, all channels (including channels
that contain no data) may be displayed.
TIP
Channels that do not contain data are not displayed. How-
ever, for some songs, all channels (including channels that
contain no data) may be displayed.
NOTE
Save the edited song data to memory using the
“SaveToMemory” (page 54) parameter.
TIP
Press the C [–]/[+] and D [–]/[+] buttons to specify the range
to be repeated during song playback.
TIP
When you select another song, the specified range is auto-
matically cancelled and the Repeat function is turned off.
NOTE
If you set the [FromToRepeat] parameter for a song
recorded at free tempo, the timing of the metronome sound
and the song may occasionally not match.
NOTE
Some preset songs contain song data recorded at free
tempo.
Summary of Contents for P-250
Page 56: ...MEMO 56 P 250 Edit Operation ...
Page 80: ...MEMO 80 P 250 Appendix ...
