21
P-60/P-60S
17
EQ Mid
G3
The sine wave of C4 sounds.
Confirm that each output level is as follows. (Unit: dBm)
PHONES/OUTPUT L, R: -1.5
±
2
18
EQ High
G3#
The sine wave of C6 sounds.
Confirm that each output level is as follows. (Unit: dBm)
PHONES/OUTPUT L, R: -1.2
±
2
19
D/A noise
A3
Play any keys and confirm that no D/A noise is generated.
Press the C7 key to exit the D/A noise test and proceed to the next test
item.
20
SW, LED
A3#
1. Press the [DEMO] button.
Confirm that the sine wave of C3 sounds and the LED lights up.
2. Press the [VOICE] button.
Confirm that the sine wave of C3 sounds.
33
Damper
C4#
Connect a foot pedal to the [DAMPER PEDAL] jack and execute the
test.
Confirm that the sine wave of C3 sounds when the foot pedal is
pressed.
Confirm that the sine wave of C4 sounds when the foot pedal is re-
leased.
37
MIDI
D4
Connect the [MIDI IN] jack and the [MIDI OUT] jack via a MIDI cable
and execute the test.
When the result is OK, the sine wave of C4 sounds.
When the result is NG, the sine wave of C2 sounds.
41
ROM Check 2
D4#
When the result is OK, the sine wave of C4 sounds.
When the result is NG, the sine wave of C2 sounds.
It takes about 45 seconds until this test is finished.
42
RAM Check 2
E4
When the result is OK, the sine wave of C4 sounds.
When the result is NG, the sine wave of C2 sounds.
48
TEST MODE Exit
C7
Exit the test program and return to the normal mode.
