4. Connections
4.1. Audio input connections
●
For the PC-D series
Connect the rear panel XLR jacks to the balanced outputs of the mixer, and input analog signals. The jack
polarity is shown in the illustration below (IEC 60268).
1
2
3
●
For the PC-DI series
- When attaching a cable to a Euroblock plug, strip the wire as shown in the illustration, and use stranded wire to
make connections. In the case of Euroblock wiring, stranded wire may break more easily due to metal fatigue
caused by the weight or vibration of the cable. Use the included cable ties to secure the cables to the tab.
CAUTION
When using stranded wire, do not tin the strands with solder.
• If connections will be frequently plugged and unplugged, as in a portable setup, we recommend that you
use rod terminals equipped with insulating sleeves. Use rod terminals whose conductor section is as
shown below.
5.08 mm Euroblock 6-pin
External diameter 1.6 mm or less, and length approximately 7 mm
(such as the AI0, 5-6WH made by the Phoenix Contact company)
4. Connections
PC412-D PC412-DI PC406-D PC406-DI Owner’s Manual |
11
