12.2. Initialization if you have forgotten the PIN code, etc.
If you are unable to select INITIALIZE in the UTILITY screen, for example if you have forgotten the PIN code
specified for panel lock, you can initialize using the following method.
1. Disconnect the unit from the AC outlet.
2. While holding down channel select key
[A] and the [
] (back) key, connect the unit to the AC outlet.
A confirmation screen appears.
3. Press the main knob to confirm.
Initialization begins. During initialization, all channel indicators are lit red.
When initialization is completed, all channel indicators are lit green, the unit restarts automatically, and then
enters the standby state.
12. Returning to the factory settings (initialization)
PC412-D PC412-DI PC406-D PC406-DI Owner’s Manual |
69
