35
ENGLISH
Setup hint
This moves the picture around the screen in small amounts, at
set intervals, to reduce the panel image retention. Image
retention occurs when stationary objects, such as screen logos,
leave a slight image visible after they should have disappeared.
This is used to reduce the panel image retention that can occur
with stationary pictures by displaying a completely white screen.
Select On (continuous operation) or 60 Min. (time limit operation)
and press the OK button. Press the MENU or RETURN button on
the remote control to return to normal viewing.
This turns the gray sidebars On/Off when watching normal
mode screen size area. It is always set to Off when the monitor
is powered On. It is recommended to set Black Side Panel to off
to reduce the panel image retention.
The original factory settings for the items of this Menu page can
be restored by pressing the OK button.
This function suppresses the contrast of the screen regardless of
the Contrast setting in the Picture Menu. By this control, power
consumption can be reduced or degradation of a panel can be
mitigated. The order of power consumption is Extend 2 < Extend
1 < Normal. If the Contrast setting is changed when this item is
set to Extend 1 or 2, it will be changed to Normal automatically.
This function displays the Input Signal Screen Display every time
the input mode and signal mode are changed. Set to OFF if the
Input Signal Screen Display is not needed when switching signals.
Assigns ID Nos. to the monitors so that they can be controlled
individually (up to 7 monitors can be controlled).
This function changes each level of RGB signal invert to reduce
the panel image retention. When this function is required, select
On (continuous operation) or 60Min. (time limit operation) and
press the OK button. And press the Menu or Return button to exit.
This function is also provided to prevent image retention. If time
is set for this item, the screen changes into a white pattern when
the monitor enters power save mode, and continues for the
period of setting time.
Normally set to 2.2.
Selected characters
Screen Saver
Screen Wipe
Black Side Panel
Video Power Save
Reset
Panel Life
Mode Display
ID Number
Inverse
Standby White
Gamma
On
On
60 Min.
(Selects the Reset mode)
60 Min.
▲
▲
OPERATING INSTRUCTIONS FOR PC (continued)
FUNCTION MENU
MENU
OK
➛
➛
➛
➛ ➛
Picture
Audio
Timer
Function
Setup
Language
Select
OK Set
Function
Screen Saver
Off
Screen Wipe
On 60Min.
Black Side Panel
Off
Video Power Save
Off
Freeze Mode
Split
Default Zoom
Panoramic
Reset
Reset
Select Set Return
Function
Panel Life
Normal
Mode Display
Off
ID Number
1
Inverse
On 60Min.
Standby White
Off
Gamma
2.2
Reset
Reset
Select Set Return
Off 5Min. 10Min.
60Min. 40Min. 20Min.
Off On
Normal Extend 1 Extend 2
Off On
1 2 3 4
7 6 5
Off 15Min. 30Min.
120Min. 60Min.
2.2 2.8
21
015_PDM-5520_U_E
12/13/04, 9:24 AM
35
