Using the Metronome
NP-31/NP-11 Owner’s Manual
15
Also, while holding down the [METRONOME ON/OFF] button, use the fol-
lowing keys to increase or decrease in single or ten steps.
Increasing the tempo value in steps of one:
While holding down the [METRONOME ON/OFF] button, press the F
#
2 key.
Decreasing the tempo value in steps of one:
While holding down the [METRONOME ON/OFF] button, press the E2 key.
Increasing the tempo value in steps of ten:
While holding down the [METRONOME ON/OFF] button, press the G2 key.
Decreasing the tempo value in steps of ten:
While holding down the [METRONOME ON/OFF] button, press the D
#
2 key.
Resetting the tempo to default:
While holding down the [METRONOME ON/OFF] button, press the F2 key.
Entering a specific tempo number
The numbers 0 – 9 are assigned to the keys C1 – A1, respectively (see below).
While holding down the [METRONOME ON/OFF] button, press the appropri-
ate 0 (C1) – 9 (A1) keys in sequence to specify a two or three-digit number.
Select a number starting from the left-most digit. For example, to set the tempo
to “95,” press the 9 (A1) and 5 (F1) keys in sequence.
Adjusting the volume
Setting range:
C4 (1) – G5 (20)
Default setting:
A4 (10)
You can change the volume of the metronome sound.
While holding down the [METRONOME ON/OFF] button, press one of the C4
– G5 keys to determine the volume.
Pressing a higher key results in a higher volume, while pressing a lower key
results in a lower volume.
C3
C2
G2 (+10)
C1
E2 (-1)
D
#
2 (-10) F
#
2 (+1)
NP-31
NP-11
F2 (default)
C1
C2
A1
C1
A1
NP-31
NP-11
NOTE
C6
C4
(1)
C5
G5
(20)
NP-11
NP-31