E-
11
English
Français
Deutsc
h
Svenska
Italiano
Español
Nederlands
INSTALLING THE PROJECTOR
1
Attach the projector mounting adapter onto the projector.
Align the holes in the mounting adapter with the holes in the bottom of the projector, and then use the four
projector mounting screws (M4, pan head) provided to securely attach the mounting adapter to the
projector.
Caution
•
Do not tighten the projector mounting screws excessively. Excessive tightening could damage the mount and cause
the projector to fall.
2
Attach the safety wire.
Use the four safety wire mounting screws (M4, pan head) provided to attach the safety wires to the
projector mounting adapter, as shown below. After tightening the screws, place the wire loops around the
projector’s adjusters, and then tighten the band.
Projector mounting adapter
Projector mounting screws (M4, pan head)
Bottom of the projector
Safety wire mounting screws
(M4, pan head)
Projector mounting adapter
Band
Safety wire
