POCKETRAK CX Owner’s Manual
26
Recharging the eneloop
WARNING
• Recharge the eneloop at an ambient temperature of between 5 and 35 degrees Celsius (41 and 95
degrees Fahrenheit).
• Be sure to close the battery cover before you start recharging.
1.
Make sure that the eneloop battery is inserted in the recorder.
DANGER
• Do not attempt the recharge operation with an alkaline or other battery installed inside. Otherwise,
the battery liquid may leak or the recorder may malfunction.
2.
From the main screen, press and hold down the [MENU/
ENTER] button for at least two seconds to access the [COM-
MON MENU]
→
[BATTERY SET], then make sure that
“eneloop” is selected.
3.
Connect the recorder to a computer (page 23).
4.
Make sure that the LCD screen on the
recorder indicates that the unit is connected
to the computer, then set the [HOLD/
CHARGE] switch to [HOLD
w
].
The LED lights up green, and recharging starts.
To cancel the recharge operation, revert the
[HOLD/CHARGE] switch setting.
When recharging is complete, the LED turns
off.
Note:
· Recharging a completely exhausted eneloop battery
takes approximately 220 minutes.
· You can recharge an eneloop battery during data
transfer. However, the battery may be exhausted
more quickly.
5.
Disconnect the recorder from your com-
puter.
HOLD
CHARGE
E
X
A-B REPEAT
HOLD
CHARGE
Back side
[HOLD/CHARGE]
switch
Set to [HOLD].
Summary of Contents for PocketrakCX - POCKETRAK CX 2 GB Digital...
Page 1: ...JA ZH RU IT ES FR DE EN...
