MIDI Functions
68
By connecting your DGX-200’s MIDI terminals to a personal computer, you can
have access to a wide variety of music software.
●
When using a MIDI interface device installed in the personal
computer, connect the MIDI terminals of the personal com-
puter and the DGX-200.
●
When using a MIDI interface with a Macintosh series com-
puter, connect the RS-422 terminal of the computer (modem
or printer terminal) to the MIDI interface, as shown in the dia-
gram below.
●
When connecting to a computer with a USB interface, use the
Yamaha UX16 USB/MIDI Interface. Connect the UX16 and the com-
puter with a standard USB cable, then make the proper MIDI con-
nections between the DGX-200 and the UX16.
Connecting to a Personal Computer
MIDI IN
MIDI OUT
MIDI OUT
MIDI IN
Computer
(sequencer software)
DGX-200
MIDI IN
RS-422
MIDI OUT
MIDI Interface
Computer
(sequencer software)
DGX-200
• When using a Macintosh series
computer, set the MIDI interface
clock setting in the application
software to match the setting of
the MIDI interface you are using.
For details, refer to the owner’s
manual for the software you are
using.
Viewing the Notation for MIDI
Channel 1
• The DGX-200 has a special func-
tion that lets you view the notes
of the MIDI data (channel 1 only)
on the display.
IN
OUT
MIDI IN
USB
MIDI OUT
UX16
Computer
(sequencer software)
DGX-200
Summary of Contents for Portable Grand DGX-200
Page 1: ......
