manualshive.com logo in svg

Yamaha Portatone PSR-1500, Owner'S Manual

The Yamaha Portatone PSR-1500 is a versatile keyboard equipped with an array of impressive features. With a user-friendly interface, this instrument allows musicians to unleash their creativity. Explore its full potential by accessing the free Service Manual, available for download at 88.208.23.73:8080, and discover endless possibilities for musical expression.

Share
Download
background image

* This applies only to products distributed by YAMAHA CORPORATION OF AMERICA.

(class B)

                                                                                               (standby)

FCC INFORMATION (U.S.A.)

1.

IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT!

This product, when installed as indicated in the instruc-
tions contained in this manual, meets FCC require-
ments. Modifications not expressly approved by 
Yamaha may void your authority, granted by the FCC, to 
use the product.

2.

IMPORTANT: 

When connecting this product to acces-

sories and/or another product use only high quality 
shielded cables. Cable/s supplied with this product 
MUST be used. Follow all installation instructions. Fail-
ure to follow instructions could void your FCC authori-
zation to use this product in the USA.

3.

NOTE: 

This product has been tested and found to com-

ply with the requirements listed in FCC Regulations, 
Part 15 for Class “B” digital devices. Compliance with 
these requirements provides a reasonable level of 
assurance that your use of this product in a residential 
environment will not result in harmful interference with 
other electronic devices. This equipment generates/
uses radio frequencies and, if not installed and used 
according to the instructions found in the users manual, 
may cause interference harmful to the operation of 

other electronic devices. Compliance with FCC regula-
tions does not guarantee that interference will not occur 
in all installations. If this product is found to be the 
source of interference, which can be determined by 
turning the unit “OFF” and “ON”, please try to eliminate 
the problem by using one of the following measures:

Relocate either this product or the device that is being 
affected by the interference. 

Utilize power outlets that are on different branch (circuit 
breaker or fuse) circuits or install AC line filter/s.

In the case of radio or TV interference, relocate/reorient 
the antenna. If the antenna lead-in is 300 ohm ribbon 
lead, change the lead-in to co-axial type cable.

If these corrective measures do not produce satisfac-
tory results, please contact the local retailer authorized 
to distribute this type of product. If you can not locate 
the appropriate retailer, please contact Yamaha Corpo-
ration of America, Electronic Service Division, 6600 
Orangethorpe Ave, Buena Park, CA90620

The above statements apply ONLY to those products 
distributed by Yamaha Corporation of America or its 
subsidiaries.

OBSERVERA!

Apparaten kopplas inte ur växelströmskällan (nätet) 
så länge som den ar ansluten till vägguttaget, även 
om själva apparaten har stängts av.

ADVARSEL:

 Netspæendingen til dette apparat er 

IKKE afbrudt, sålæenge netledningen siddr i en 
stikkontakt, som er t endt — også selvom der or 
slukket på apparatets afbryder.

VAROITUS: 

Laitteen toisiopiiriin kytketty 

käyttökytkin ei irroita koko laitetta verkosta.

This product contains a high intensity lamp that con-
tains a small amount of mercury. Disposal of this 
material may be regulated due to environmental 
considerations.
For disposal information in the United States, refer 
to the Electronic Industries Alliance web site:
www.eiae.org

(mercury)

* This applies only to products distributed by 

YAMAHA CORPORATION OF AMERICA.

Summary of Contents for Portatone PSR-1500





























































































































































































































Reviews:

No comments

Related manuals for Portatone PSR-1500

iDataLink Maestro Installation Manual preview
Maestro
Brand: iDataLink Pages: 9
Xtrfy K5 Compact Manual preview
K5
Brand: Xtrfy Pages: 15
Audiovox Prestige APS-45B Installation Manual preview
Prestige APS-45B
Brand: Audiovox Pages: 8
Casio CTK-900 Midi Implementation Manual preview
CTK-900
Brand: Casio Pages: 80
Intesis INBACMBM Series Application / Installation preview
INBACMBM Series
Brand: Intesis Pages: 2
Polar Electro IR INTERFACE Operating Instructions preview
IR INTERFACE
Brand: Polar Electro Pages: 2
V-fitness VF-BUNDLE5 Instruction Manual preview
VF-BUNDLE5
Brand: V-fitness Pages: 10
Adesso WKB-3000UB User Manual preview
WKB-3000UB
Brand: Adesso Pages: 9
Brookstone 839115 Quick Manual preview
839115
Brand: Brookstone Pages: 12
Monzana 105573 Instructions preview
105573
Brand: Monzana Pages: 5
PC LINE KB200 Manual preview
KB200
Brand: PC LINE Pages: 11
ARMOUR PRO User Manual preview
PRO
Brand: ARMOUR Pages: 7
Korg POLY-61 Installation Manual preview
POLY-61
Brand: Korg Pages: 8
Korg nanoPad2 Parameter Manual preview
nanoPad2
Brand: Korg Pages: 14
Korg PA80 Abridged Service Manual preview
PA80
Brand: Korg Pages: 20
Blu eCigs User Manual preview
eCigs
Brand: Blu Pages: 10
VooPoo REX Manual Instruction preview
REX
Brand: VooPoo Pages: 12
Thermaltake Tt eSPORTS Poseidon Z RGB Manual preview
Tt eSPORTS Poseidon Z RGB
Brand: Thermaltake Pages: 4

Brands by name

Popular brands

Load more brands