PSR-260/262
16
20
020: SW Chk
Check switches on the panel.
Press the switches that are displayed on the LCD.
A pre-assigned note is output when pressing the switch.
The test result appears on the LCD.
28
028: LCD On
Check that all LCD dots are on.
29
029: LCD Off
Check that all LCD dots are off. The LCD becomes white.
31
031: PD1 Chk
Connect the foot switch to the [FOOT SWITCH] jack.
Check that the C3 note is output when starting the test program.
Check that the C4 note is output when pushing the pedal and that the tone is turned off when
releasing the pedal.
The test result appears on the LCD.
37
037: MIDI Chk
After connecting the [MIDI IN] jack and [MIDI OUT] jack with a MIDI cable, execute the test.
Check that the C4 note is output and that the test result appears on the LCD.
If the test result is NG, press the lowest (leftmost) key on the keyboard to execute the test.
41
041: ROM Chk 2
Checks the ROM. The test result appears on the LCD.
42
042: RAM Chk 2
Checks the RAMs that are connected to the CPU.
The test result appears on the LCD.
48
048: Test Exit
Exit from the test program after executing this test.
Summary of Contents for PortaTone PSR-260
Page 11: ...PSR 260 262 11 Pattern side ...
Page 19: ...2 PSR 260 OVERALL ASSEMBLY ...
Page 21: ...4 PSR 260 KEYBOARD ASSEMBLY ...