PSR-E323/YPT-320 Owner’s Manual
37
Ref
erence
Record your own performance
You can record up to five of your own performances as User Songs (User 1–5: Song num-
bers 103–107). Think of each User Song as a kind of basket or drawer for storing your
recording. Remember that you can also record a Style (containing chord changes) along
with your own performance.
1
Press the [REC] button.
After you’ve selected the desired User Song for recording, you can
select a Style to be recorded as well. To do this, press the [STYLE] but-
ton and select the Style number while the ACMP indication is on.
You can turn off the Record mode by pressing the [REC] button again
(
and
stop flashing).
2
Start recording.
When you play the keyboard, recording will begin.
By playing keys to the left of the Split Point when the Auto Accompa-
niment is set to on, the Style starts sounding and is recorded with your
performance.
When Auto Accompaniment is set to off, only your keyboard perfor-
mance is recorded.
User 1
rEC
001
Flashes
The lowest-numbered unrecorded User Song
(Song numbers 103–107) available for recording
is displayed. If you want to select the Song you
will be recording, select the desired Song number
by using the [+] and [-] buttons.
• A total of approximately
10,000 notes or 5,500
chord changes can be
recorded to the five User
Songs.
NOTE
• Accompaniment cannot be
turned on or off once the
[REC] button is pressed.
NOTE
• If all User Songs (Song
numbers 103–107) con-
tain recorded data, Song
103 will automatically be
selected. In this case, you
will record over and erase
any previous data in Song
103, so be careful that
you won’t be erasing any
material you want to
keep!
CAUTION
Split Point