Arpeggio Settings
Owner’s Manual
59
Re
fe
re
n
c
e
Holding the arpeggio Playback
Arpeggio playback can be made to continue after the
note has been released by pressing a footswitch con-
nected to the SUSTAIN jack. Arpeggio playback will
stop when the footswitch is released. Connect a foot-
switch (page 11), then assign the function to the foot-
switch as per the instructions below.
1
Press the [FUNCTION] button.
2
Press the CATEGORY [
] and [
] but-
tons as many times as necessary to
select “Pdl Func”.
“Pdl Func” will appear in the display for a few
seconds, then the currently selected function
assigned to the footswitch will be displayed.
3
Use the dial to select “Arp Hold”.
If you want to restore the footswitch function to
sustain, select “Sustain”. If you want to use both
hold and sustain functions, select “Hold+Sus”.
The sustain function affects the main and dual
voices only. Split voices will not be affected.
f
r
Pdl Func
The function currently
assigned to the footswitch.
Sustain
1
Arp Hold
2