PSR-E453/PSR-EW400 Owner’s Manual
62
Re
fe
re
n
c
e
USB Flash Drive Operations
By connecting the USB flash drive (sold separately) to the [USB TO DEVICE] terminal,
you can save the data created on this instrument, such as User Song and parameter
settings. The saved data can be recalled to this instrument again for the future use.
• You should use an AC adaptor when executing USB flash drive operations, since battery power may not be reliable
enough to last through these crucial operations. When you try executing certain functions, the “UseAdpt” indication
may appear and the selected function cannot be executed.
IMPORTANT
Precautions when using the [USB TO
DEVICE] terminal
This instrument features a built-in [USB TO
DEVICE] terminal. When connecting a USB device
to the terminal, be sure to handle the USB device
with care. Follow the important precautions below.
Compatible USB devices
• USB flash drive
Other USB devices such as a USB hub, computer
keyboard or mouse cannot be used.
The instrument does not necessarily support all
commercially available USB devices. Yamaha can-
not guarantee operation of USB devices that you
purchase. Before purchasing a USB device for use
with this instrument, please visit the following web
page:
http://download.yamaha.com/
Although USB devices 1.1 to 3.0 can be used on
this instrument, the amount of time for saving to or
loading from the USB device may differ depending
on the type of data or the status of the instrument.
Connecting a USB device
• When connecting a USB device to the [USB TO
DEVICE] terminal, make sure that the connector
on the device is appropriate and that it is con-
nected in the proper direction.
Using a USB Flash Drive
By connecting the instrument to a USB flash drive,
you can save data you’ve created to the connected
device, as well as read data from the connected
device.
Number of USB flash drives that can be
used
Only one USB flash drive can be connected to the
[USB TO DEVICE] terminal.
Formatting a USB flash drive
You should format the USB flash drive only with this
instrument (page 64). A USB flash drive formatted
on another device may not operate properly.
To protect your data (write-protect)
To prevent important data from being inadvertently
erased, apply the write-protect provided with each
USB flash drive. If you are saving data to the USB
flash drive, make sure to disable write-protect.
Turning off the instrument
When turning off the instrument, make sure that the
instrument is NOT accessing the USB flash drive by
playback/recording or file management (such as
during Save, Delete and Format operations). Failure
to do so may corrupt the USB flash drive and the
data.
• For more information about the handling of USB devices, refer
to the owner’s manual of the USB device.
• The rating of the [USB TO DEVICE] terminal is a maximum of
5V/500mA. Do not connect USB devices having a rating above
this, since this can cause damage to the instrument itself.
NOTE
NOTE
• Avoid connecting or disconnecting the USB device while
executing playback/recording and file management opera-
tions (such as Save, Delete and Format), or when accessing
the USB device. Failure to observe this may result in “freez-
ing” of the operation of the instrument or corruption of the
USB device and the data.
• When connecting then disconnecting the USB device (and
vice versa), make sure to wait a few seconds between the
two operations.
• When connecting a USB cable, make sure that the length is
less than 3 meters. Do not connect an extension cable.
• The format operation overwrites any previously existing
data. Make sure that the USB flash drive you are formatting
does not contain important data.
NOTICE
NOTE
NOTICE
Summary of Contents for PSR-EW400
Page 75: ...PSR E453 PSR EW400 Owner s Manual 75 MEMO ...
Page 78: ......