USB Flash Memory Operations
PSR-I455 Owner’s Manual
54
Re
fe
re
n
c
e
Saving User Data to a USB Flash
Memory
The following data created on this instrument com-
prise the “User Data.”
• All 10 User Songs
• Styles which have been transferred from a com-
puter then loaded to Style numbers 207–211.
• All the Registration Memory settings
The User Data can be saved as a single “User File”
(.usr) to a USB flash memory.
1
Hold the [FILE CONTROL] button for
longer than a second to call up the File
Control display.
2
Use the CATEGORY [+] and [-] buttons to
call up “Save USR.”
3
Press the [0/EXECUTE] button.
As the target file name, “USER***” (***: num-
ber) appears on the display. If desired, rotate the
dial to select a different file name from
“USER001”–“USER100.”
4
Press the [0/EXECUTE] button again.
A confirmation message will appear. To cancel the
operation, press the [-/NO] button.
5
Press the [0/EXECUTE] button again, or
the [+/YES] button to execute the Save
operation.
After a while, a message indicating completion of
the operation appears, and a User file (.usr) will be
saved in a “USER FILES” folder which will auto-
matically be created on the USB flash memory.
6
Press the [FILE CONTROL] button to exit
from the File Control display.
• The extension (.usr) of the User File will not be shown on the
display of this instrument. Confirm the extension on the com-
puter display when connecting the USB flash memory to a
computer.
Overwriting existing files
If a file that already contains data is selected
as the target user file, an overwrite confirma-
tion message will appear.
NOTE
Save USR
USER001
• The Save operation cannot be cancelled during exe-
cution. Never turn off the power or disconnect the
USB flash memory during the operation. Doing so
may result in data loss.
• The amount of time required for this operation may vary
depending on the condition of the USB flash memory.
• If you want to recall the User file (.usr) to this instrument
again, execute the Load operation (page 56).
NOTICE
NOTE
NOTE
