QL5/QL1
174
STARTING SEQUENCE
●
Start mode (Flow)
Next Page
→
Normal mode
Forced Factory Preset mode
Maintenance mode
Diag mode
A SEL + B SEL key
Power ON
Boot Loader started
Initialization of port
USB Memory presence
Check if QL Firmware (PGM
r
C-MD1.bin) file is present
Firmware Update
Displayed as confirmed
Firmware Update
Executed
Checksum of the main program confirmed
“CheckSum Error!” is displayed and the
sequence is stopped.
Main Program started Text within <> is the task name
Initialization of port ..... PLL action starts, set the reset terminal of each device to reset
Decompress the data compressed in the ROM to the SDRAM. <SysKernel>
Start Kernel
(PGM file present)
or
(C-MD1.bin file present)
BUS Initial Settings <SysKernel>
- Cancel I2C (P-BUS) Reset, cancel E-BUS Reset
- E-BUS driver initialization and E-BUS START
- I2C driver initialization and P-BUS START
Check if the panel circuit board is present.
<SysKernel>
(Not
present)
MRAM checksum judged <SysKernel>
Current memory (MRAM) all cleared
Current memory (MRAM) all cleared
SCENE data (Flash memory) all cleared
[Initializing Flash Memory...] displayed
Pressed switches are read
→
start-up mode judged
Opening screen displayed. <LCD Display>
When the start-up mode is Diag.
If not present, the
start-up mode changes
to Diag mode.
(UPDATE cancelled)
(Not present)
(OK)
(NG)
B SEL key
or
B SEL + 32(16)CH SEL key
Press USER DEFINED keys 1, 2
and 3 simultaneously or 3 keys of
other than those simultaneously.
LCD Diag screen displayed, processed
<LCD Display>
Panel Diag displayed, processed
Power turned off.
Summary of Contents for QL5
