Engli
s
h
9
En
OPERA
T
IO
N
OPERATION
This manual describes how to operate this unit by using the remote control.
To operate this unit from the front panel, use the corresponding buttons on the front panel.
The
,
and
icons indicate music data formats that can be
used in the operation.
1
Press POWER to turn on the power.
2
Press CD/USB to switch between disc mode
and USB mode.
When USB mode is selected, the USB indicator lights
up, and when disc mode is selected, the USB
indicator lights off.
y
This setting is retained even if you turn off this unit.
■
Playing back discs
1
Press OPEN/CLOSE to open the disc tray,
and load a disc.
• When you load a disc, set the disc on the inside of the disc
guides (4 marks on the disc tray).
• The disc may not be read correctly, if it is set incorrectly. In this
case, open the disc tray and set the disc again.
2
Press OPEN/CLOSE to close the disc tray.
y
You can also close the disc tray by pressing
h
, a numeric button,
or by pressing the front edge of the disc tray gently. If the tray is
closed in one of these ways, playback starts automatically.
3
Press
h
to start playback.
For an Audio CD, playback starts from the first track,
and for a Data Disc, in alphanumeric order by
filename.
BASIC OPERATION
Audio CD
Data Disc
USB
Starting playback
Audio CD
Data Disc
Disc tray
Label side up.
Notes
Audio CD
Data Disc
Total number of tracks
Total recorded time of a disc
Total number of files
Display information in step 2