Preparing the DAB tuning
Model For
U.K., Europe, Russia and Australia
Before listening to DAB (Digital Audio Broadcasting) radio, perform an initial scan to register the DAB radio
stations automatically.
1
Switch the input to “TUNER”.
2
Press the TUNER key to select the DAB band.
After 3 seconds, the initial scan starts. When the initial scan finishes, this product
automatically tunes in to the first DAB radio station in order by frequency.
NOTE
(
DAB uses digital signals for clearer sound and more stable reception compared to analog signals. This product can also receive
DAB+ (an upgraded version of DAB) that allows for more stations using MPEG-4 HE-AAC v2 audio codec, which has a more efficient
transmission method.
(
Be sure to check the DAB coverage in your area in that not all areas are currently being covered. For a list of nationwide DAB
statuses and worldwide DAB frequencies, check WorldDMB online at http://www.worlddab.org/.
(
If no DAB radio stations are found by an initial scan, the front display will change to “Off Air”.
(
To perform an initial scan again after some DAB radio stations are stored, select “Init Scan” in the Option menu. If you perform an
initial scan again, the DAB radio stations currently registered to the preset numbers will be cleared.
(
You can check reception strength of each DAB channel label. Select “Tune AID” in the Option menu.
Related links
(
“Checking reception strength of each DAB channel label” (p.82)
(
“Performing an initial scan for DAB radio reception” (p.81)
n
DAB frequency information
This product supports Band III (174 to 240 MHz) only.
Frequency
Channel label
174.928 MHz
5A
176.640 MHz
5B
178.352 MHz
5C
180.064 MHz
5D
181.936 MHz
6A
183.648 MHz
6B
185.360 MHz
6C
187.072 MHz
6D
61
PLAYBACK > Listening to the radio
Summary of Contents for R-N2000A
Page 1: ...Receiver User Guide EN ...
