Firmware Update Procedure for R-N602
STEP 7
Confirm updated firmware version
Retry from STEP 2 to enter “ADVANCED MODE”. Rotate
SELECT/ENTER
to select firmware
version. Confirm that the firmware version has been updated.
Congratulations!
You have completed the firmware update. Your R-N602 is ready for normal use.
[ 3. Troubleshooting ]
In case error message appeared during the update and unable to power on, perform following
update procedure.
STEP 1
Copy the update file to a USB thumb drive
Unzip the downloaded file and copy to the root directory of a USB thumb drive.
Be sure to delete all other files in a USB thumb.
STEP 2
Insert the USB thumb drive on the front panel
In this step, AC power cable needs to be disconnected and power switch on the front panel is
pressed to
POWER/ON
in advance.
STEP 3
Enter firmware update mode
Connect AC power cable to AC outlet, while pressing
DIMMER
button.
”
USB UPDATE
” will be shown in the front panel display.
Firmware update will be started automatically.
note:
DO NOT
interrupt the power or press any buttons during the update.
In case the power is accidentally cut off, perform the update procedure from STEP 1 again.
Update is completed when “
UPDATE SUCCESS
”, “
PLEASE…
”, “
POWER OFF!
” is displayed
alternately. Then, power off the unit.
STEP 4
Confirm updated firmware version
Enter “
ADVANCED SETUP
” mode as introduced in previous sections. Rotate
SELECT/ENTER
to select firmware version. Confirm that the firmware version has been updated.
Congratulations!
You have completed the firmware update. Your player is ready for normal use.
VERSION
… X.XX
(X.XX shows actual firmware version.)
