27
Getting the most out of it
Restoring devices, macro groups or timer groups
1 Make sure the device tab or macro tab is active.
The device or macro tab is active when the name of a device, macro or timer is
displayed.
2 Switch to Add mode via the Mode button
.
3 Tap Restore Deleted Device or Restore Deleted Group.
The deleted devices, macro groups or timer groups become visible.
4 Tap the item you want to restore.
The item is restored and you return to Use mode.
Note
Only the macro group or timer group itself is restored, not the macros or timers it contained.
You will need to record the macros and set the timers again in Edit mode.
7. Recording Macros and Setting Timers
A macro allows you to send a sequence of IR commands using a single button.
When you select MACRO in the Macro menu, seven macro groups (DVD, GAME, etc.)
appears by default. Each group includes buttons that allow you to record a sequence of
commands. In the macro menu, there are two other macro groups (POWER and SOURCE).
Power
When you select POWER in the macro menu, you see the touch screen that appears when
you tap
in the home menu panel. Commands for turning several A/V devices on or off
at the same time are recorded in each power group button. A command a single device on or
off is recorded in the corresponding device button.
Source
When you select SOURCE in the macro menu, you see the touch screen that appears when
tapping
or
in the home menu panel. A command to switch the device control
panel (and to switch the input of only the amplifier, not of all devices) is recorded in each
device button.
You can enhance and customize macros by recording new commands and editing them.
With a timer you can activate a device at the time you determine.
Note
To record a macro or set a timer, there must be at least one macro group or timer group in
the Macro menu. To create these groups, see ”Organizing macros and timers into groups“ on
page 31.
English
Summary of Contents for RAV-2000
Page 1: ...R ...
