5
Getting started
2. Defining the Brands of your Devices
The Remote Control uses RC codes to activate devices. Because there are several brands
using specific RC codes, you have to define the brands of your devices.
The Remote Control is set up by default to operate with YAMAHA devices.
1 Tap scroll button
to go to second (or third) control
panel.
A/V devices are listed in the second and third control panel.
• To select amplifier, tap
.
2 Tap a device name to select the desired device.
3 If the brand of your device is YAMAHA, click No.
The Remote Control switches to Use mode.
-or-
If you want to adjust the Remote Control to operate with
your brand, click Yes.
The Remote Control switches to Brand mode. Follow the
instructions as described below. You can define your brands
by selecting or by searching.
Note
Before you start using the Remote Control, make sure you define the brand for each device
you want to operate.
Defining brands by selecting
A list of brands and their corresponding RC codes are stored in the
Remote Control’s memory.
Select your brand from the list. Because not every device of a
certain brand uses the same RC codes, you might also need to
select from a set of RC codes for your brand.
4 Tap Next.
A scrollable list of brands for the selected device and a
“virtual auto-zooming” mini-keyboard appears.
English
Summary of Contents for RAV-2000
Page 1: ...R ...
