20
reface CS/DX/CP/YC Owner’s Manual
Functions of Front Panel Components
u
VOICE SELECT/EDIT section
For recalling a total of 32 Voices by changing
Bank numbers (1 to 4) and Voice numbers (1
to 8).
u
-1. [BANK] button
For changing the bank number. Each time
you press this button, the number cycles
through 1 to 4.
u
-3. [1]–[8] buttons
For selecting one of eight Voices from the
selected Bank.
u
-2. [EDIT] button
For activating Edit mode for the selected
Voice. In this mode, you can edit sounds by
setting the EG level, LFO, and other parame-
ters from area
u
-3
.
u
-3. [OP1]–[OP4], [EG level], [EG
rate], [LFO], and [Pitch EG] but-
tons
[OP1]–[OP4]:
For displaying the setting
screen for the corresponding operator.
These buttons can be pressed repeatedly to
cycle through the screen’s individual
pages.
[EG level]:
For displaying the EG Level Set-
tings screen for operators. This button can
be pressed repeatedly to cycle through the
four operators.
[EG rate]:
For displaying the EG Rate Set-
tings screen. This button can be pressed
repeatedly to cycle through the four opera-
tors.
[LFO]:
For displaying the LFO Settings
screen. This button can be pressed repeat-
edly to cycle through the screen’s individ-
ual pages.
[Pitch EG]:
For displaying the Pitch EG Set-
tings screen. This button can be pressed
repeatedly to cycle through the screen’s
individual pages.
For details regarding the [EDIT] button (
u
-
2
) and the [OP1] to [Pitch EG] buttons (
u
-
3
), refer to the “Reference Manual” (a digital
manual).
NOTE
If you open the Job screen by pressing the
[FUNCTION] button and then do a Voice Initial-
ize, you can start editing with parameters set
so as to produce a sine wave.
Bank number (1–4)
Voice number (1–8)
