reface CS / reface DX / reface CP / reface YC V1.30 Updater Guide
8
Main Enhancements
[V1.20
V1.30]
Additional features and specifications changes
reface CS
• It is now possible to set the master tuning, master transpose, pitch bend range, transmit channel, and receive channel.
• A click sound has been added to the Phrase Looper.
• Sustain can now be applied using an FC3 foot pedal or an FC4 or FC5 foot switch.
reface DX
• A Tuning screen has been added as Page 2 displayed by using the [FUNCTION] button. On this page, you can set the
master tuning and master transpose.
• A click sound has been added to the Phrase Looper.
[V1.00
V1.30]
Additional features and specifications changes
reface CP
• It is now possible to set the master tuning, master transpose, transmit channel, and receive channel.
reface YC
• It is now possible to set the master tuning, master transpose, transmit channel, and receive channel.
• When the rotary speed is FAST, you can now also switch to SLOW by moving the [ROTARY SPEED] lever up once.
[V1.01
V1.20]
Additional features and specifications changes
reface CS
• The pitch bend range can now be switched between “12” (1 octave) and “2” (2 semitones).
• The LOOPER can now quantize at either sixteenth notes or eighth-note triplets.
reface DX
• The LOOPER can now quantize at either sixteenth notes or eighth-note triplets.
Copyright© 2016 Yamaha Corporation. All Rights Reserved.
Manual Development Department
© 2016 Yamaha Corporation
Published 03/2016 PO-B0
