background image

10 

Property/Action 

Command Format 

Description 

Response 

pushtotalk 

get pushtotalk <group name>  Retrieve group push to talk setting value,  

1 - push to talk set,   0 - not set. 

val pushtotalk <group name> 

<0/1> 

pushtotalk 

set pushtotalk <group name> 

<0/1/2> 

Configure group push to talk setting,  

1 - push to talk set,   0 - not set,   2 - toggle. 

val pushtotalk <group name> 

<0/1/2> 

pushtotalkmic 

get pushtotalkmic ch 

<channel number> 

Retrieve microphone's push to talk state. 

1 - push to talk set,   0 - not set. 

val pushtotalkmic ch 

<channel> <0/1> 

regnotify 

regnotify 

Enables system notification 

removemicfromgroup 

removemicfromgroup ch 

<channel number> <group 

name> 

Remove the given mic from the designated 

group. 

removemicfromgroup ch 

<channel number> <group 

name> 

restart 

set restart ch <channel 

number> 

Restart the given channel, if channel A is 

specified, restart all mics. 

val restart ch <channel 

number> 

restart 

set restart <component> 

Restart the specified component,  

all - all devices,   AR - antenna receiver,  

base - base receiver. 

val restart <component> 

rfautoscaling 

get rfautoscaling 

Retrieve the RF auto scaling setting value,  

0 - off,   1 - on. 

val rfautoscaling <0/1> 

rfautoscaling 

set rfautoscaling <0/1> 

Configure the RF auto scaling setting,  

0 - off,   1 - on. 

val rfautoscaling <0/1> 

rfpowerlevel 

get rfpowerlevel 

Retrieve RF power level.  

2 = (0 - 20 ft),   3 = (10 - 40 ft),   4 = (30 - 75 ft),  

5 = (50 -150 ft),   6 = (100 - 300 ft) 

val rfpowerlevel <2/3/…/6> 

rfpowerlevel 

set rfpowerlevel <2/3/…/6> 

Configure RF power level.  

2 = (0 - 20 ft),   3 = (10 - 40 ft),   4 = (30 - 75 ft),  

5 = (50 -150 ft),   6 = (100 - 300 ft) 

val rfpowerlevel <2/3/…/6> 

serialnumber 

get serialnumber 

<base/antenna> 

Retrieve component serial number. 

val serialnumber base <serial 

number> 

shutdownmic 

shutdownmic ch <channel 

number> 

Power the microphone off. 

shutdownmic ch <channel 

number> 

startupunmutegroup 

get startupunmutegroup 

<group name> 

Retrieve given group's unmute at startup state,  

0 - mute at startup,   1 - unmute at startup. 

val startupunmutegroup 

<group name> <0/1> 

startupunmutegroup 

set startupunmutegroup 

<group name> <0/1> 

Configure given group's unmute at startup state, 

0 - mute at startup,   1 - unmute at startup. 

val startupunmutegroup 

<group name> <0/1> 

systemclockmode 

get systemclockmode 

Retrieve system clock mode,  

0 - Internal,    1 - External,   2 - Auto. 

val systemclockmode 

<0/1/2> 

systemclockmode 

set systemclockmode 

<0/1/2> 

Configure system clock mode,  

0 - Internal,    1 - External,   2 - Auto. 

val systemclockmode 

<0/1/2> 

systemclocksource 

get systemclocksource 

Retrive system clock source,  

0 - local,   1 - Sync bus,   2 - Avb. 

val systemclocksource 

<0/1/2> 

systemclocksource 

set systemclocksource 

<0/1/2> 

Configure system clock source,  

0 - local,   1 - Sync bus,   2 - Avb. 

val systemclocksource 

<0/1/2> 

systemclockstatus 

get systemclockstatus 

Retrieve system clock status. 

0 - no system clock,  1- system clock 

val systemclockstatus <0/1> 

systemname 

get systemname 

Retrieve system name. 

val systemname <name> 

tabletopmutegroup 

get tabletopmutegroup 

<group name> 

Retrieve the given group's tabletop mute state,  

0 - not tabletop mute,   1 - tabletop mute. 

val tabletopmutegroup 

<group name> <0/1> 

tabletopmutegroup 

set tabletopmutegroup 

<group name> <0/1> 

Configure the given group's tabletop mute state, 

 0 - not tabletop mute,   1 - tabletop mute. 

val tabletopmutegroup 

<group name> <0/1> 

usbipaddr 

get usbipaddr 

Retrieve the USB ethernet interface IP address. 

val usbipaddr <ip address> 

version 

get version 

Retrieve the system bundle version. 

get version <version> 

Summary of Contents for Revolabs Executive Elite 01-ELITEEXEC8














Reviews: