44
Beside this option, the Manage Groups button will navigate to the Group
Management page, also found under the Audio Management menu.
Both the Monitor and Microphone Audio pages have a microphone control
dropdown menu accessible from the microphone tables. To open the menu,
hover over the desired microphone’s column and a black-on-white arrow
button will appear in the upper right corner. Clicking the arrow opens the
microphone control menu, allowing access to the following options:
Mute LED Behavior – Hovering over this selection will open a sub-menu
allowing changes to the LED mute behavior of the microphone. Factory
default is Flash Green / Red for unmuted/muted behavior. This can be
changed to Solid Green/Red, or Solid Green/Off. Please be aware that
selecting Solid LED behavior influences the maximum talk times of the
microphones. The LED mute behavior is set per microphone.
Tray LED Behavior – Hovering over this selection will open a sub-menu
allowing changes to the LED behavior of the microphone while in the
charger. Factory default is solid red while charging / solid green for a
fully charged microphone. This can be changed to flashing red for a
charging microphone and solid red for a charged microphone. The
charging LED behavior is set system wide – changing the setting for any
microphone will affect all microphones.
Unpair Mic – The selected microphone will be unpaired from the Elite
Base Unit. The microphone will not relink if turned back on.
Restart Mic – The selected microphone turns off and reboots, relinking
after it turns back on.
Enter Standby/Leave Standby – All microphones in the same group as
the selected microphone will enter standby mode. In this mode, the
microphone will show a single Yellow blink every 10 seconds. Standby
mode uses minimal power, and can be turned off by touching the
microphone’s mute or selecting “Leave Standby” in the microphone
control dropdown.