Note:
The microphone firmware version must match the Base firmware version for the system to
function properly. A mismatch may result in no audio from the microphones.
Battery:
This provides the current battery level for the microphone that is paired to each channel and active.
The value changes in 12.5% increments and represents the bottom of the range the battery is in.
Therefore a value of 87% means that the battery level is between 87%-100%.
Pairing:
This provides the ability to activate pairing mode for the respective base station channel. It also
provides the pairing status of any base station channel already in pairing mode.
Firmware:
This window provides the current firmware versions found in the Base Station and microphones as
well as provides the HD Firmware Loader for loading the firmware to the base station and
microphones.
DIP Switches:
This displays the current state of the base station DIP switches. When a DIP switch is in the ‘OFF’
position the DIP function will remain “greyed out”. When a DIP switch is in the ‘ON’ position, the
functionality of that DIP switch will change to BLACK to indicated that the feature is active.
Revolabs HD Microphones and HD Microphone Adapters
Use any of five microphones with your Revolabs HD ™ System:
•
Revolabs HD Wearable Wireless Microphone
•
Revolabs HD Omni-directional Tabletop Wireless Boundary Microphone
•
Revolabs HD Uni-directional Tabletop Wireless Boundary Microphone
•
Revolabs HD Universal Wireless Adapter for Handheld Microphones
•
Revolabs HD Wireless Adapter for Countryman Microphones
Using the HD Wearable Wireless Microphones
The Revolabs HD Wearable Microphones, shown in the following figure, are paired to the Base
Station and can be worn on the user’s shirt pocket, lapel or on a lanyard. They provide high quality
full duplex audio between each user and the conferencing or audio system.
4
6
5
3
2
1
14
