8-10
7. Remove the oil filter cartridge
9
with an oil filter
wrench.
NOTE:
@
An oil filter wrench is available at a Yamaha dealer.
@
8. Apply a thin coat of engine oil to the O-ring of the new
oil filter cartridge.
9. Install the new oil filter cartridge with an oil filter
wrench, and then tighten it to the specified torque.
10. Install the engine oil drain bolts, and then tighten
them to the specified torques.
11. Add 2.0 L (1.8 Imp qt, 2.1 US qt) of the recom-
mended engine oil to the oil tank, and then install and
tighten the oil level gauge/dipstick and the cylinder
head cap.
12. Start the engine, warm it up for several minutes, and
then turn it off.
Tightening torque:
Oil filter cartridge:
17 Nm (1.7 m·kgf, 12 ft·lb)
Tightening torques:
Crankcase engine oil drain bolt:
10 Nm (1.0 m·kgf, 7.2 ft·lb)
Oil tank engine oil drain bolt:
16 Nm (1.6 m·kgf, 11 ft·lb)
Recommended engine oil:
See page 6-2.
Oil quantity:
With oil filter cartridge replacement:
3.0 L (2.6 Imp qt, 3.2 US qt)
Without oil filter cartridge replacement:
2.8 L (2.5 Imp qt, 3.0 US qt)
Total amount:
3.7 L (3.3 Imp qt, 3.9 US qt)
U8GG10.book Page 10 Thursday, April 28, 2005 5:43 PM
Summary of Contents for RS90NL
