1
3
2
2
within 20 feet (6 m)
- 1 -
English
Quick Reference Guide
for U.S.A.
Preparing the remote control
■
Accessories
■
Items necessary for connection
The following accessories are supplied with this product.
Speakers
Remote control
Batteries (4)
(AAA, R03, UM-4)
AM loop antenna
Indoor FM antenna
E.g.
E.g.
Front speaker
E.g.
E.g.
Center speaker
Surround speaker, surround back
speaker, and presence speaker
Active subwoofer
1
Take off the battery compartment cover.
2
Insert the four supplied AAA batteries
into the battery case, following the
polarity markings.
3
Snap the battery compartment cover
back into place.
Be sure to aim the remote control directly at the remote
control sensor on this unit during operation.
External components
TV
Cable
• Cables for connecting external components
(may differ depending on the components you are connecting)
• Speaker cables
(a quantity to match the number of speakers you are connecting)
• Audio pin cable
(for subwoofer)
Playback device such as
BD (Blu-ray Disc)/DVD players
• Use speakers with an impedance of at least 6 Ω. 4 Ω speakers can also be used as the front speakers. For more information on speaker
impedance, refer to page 3.
• If you are using a CRT monitor, we recommend that you use magnetically shielded speakers.
• Prepare at least two front speakers. The priority of the other speakers is as follows:
1 Two surround speakers
2 One center speaker
3 One (or two) surround back speaker (s)/presence speakers
YPAO microphone
Power cable
✽
Simple remote
control
* The fi gure of the supplied power cable may differ depending upon regions.
