RX-V3200/DSP-AX3200
RX-V3200/DSP-AX3200
21
L/R
C
RC/SW
FL/FR
RL/RR
A/D
DIR
Main DSP
Through
Sub DSP
Through
L/-
R/L+R
L/R
L/R
CS49329
Through
L/R
YSS938
Analog
Digital
L/R
C
RC/SW
FL/FR
RL/RR
A/D
DIR
Main DSP
Sub DSP
Through
L/-
R/L+R
L/R
L/R
CS49329
Through
L/R
YSS938
Analog
Digital
4. CS49329
8 channels are made usable by CS49329. The signal enters YSS938 through the Sub DSP passage and then undergoes
through-output.
CS49329 is selected for the Main L/R output. Using the sub-menu, it is possible to select full bit output at 0dB output level.
* As a 3dB margin of CS is always effective for RC when decoding dts ES, even when the output in full bit is specified,
the RC output remains up to 0dBFS when 0dBFS is inputted to LS/RS.
CS49329 0dB
• The signal is output including the head margin.
Head margin:
Main L/R: -18dBFS, Center: -6dBFS, Rear Center: -3dBFS, FL/FR: -6dBFS,
RL/RR: -18dBFS, SWFR: Add L/R signal at -20dBFS.
DSP THROUGH ~
CS (Analog)
(Use of CS only is not available
due to restriction of the passage.)
DSP THROUGH ~
CS (PCM)
CS49329 FULL BIT
• The signal is output in digital full bit without including the head margin.
Reference data (PRE OUT)
INPUT: DVD ANALOG
SWFR: 50Hz, Others: 1kHz
Condition
MAIN L/R CENTER
REAR C
SWFR
RL/RR
Both ch, -20 dBV, volume -10 dB -14.0 dBV -14.0 dBV -14.0 dBV -2.5 dBV -14.0 dBV
Reference data (PRE OUT)
INPUT: DVD ANALOG
SWFR: 50Hz, Others: 1kHz
Condition
MAIN L/R CENTER
REAR C
SWFR
RL/RR
Both ch, -20 dBV, volume -10 dB -14.0 dBV -8.0 dBV -11.5 dBV -2.5 dBV
-2.0 dBV
