RX-V3200/DSP-AX3200
RX-V3200/DSP-AX3200
Sub-menu
CENTER SP REAR SP
MAIN SP
MAIN LEVEL LFE/BASS
1
MAIN: SMALL 0dB
LARGE
LARGE
SMALL
0dB
SWFR
2
MAIN: LARGE -10dB
LARGE
LARGE
LARGE
-10dB
BOTH
3
CENTER: NONE
NONE
LARGE
LARGE
0dB
BOTH
4
LFE/BASS: MAIN
SMALL
SMALL
LARGE
0dB
MAIN
5
FRONT MIX: 5CH
LARGE
LARGE
LARGE
0dB
BOTH
6
REAR CENTER: MUTE
LARGE
LARGE
LARGE
0dB
BOTH
7
REAR L/R: MUTE
LARGE
LARGE
LARGE
0dB
BOTH
8. SPEAKERS SET
The input signal is automatically identified in the order of dts
→
DOLBY DIGITAL
→
AAC
→
PCM
→
Analog.
There are seven sub-menu items as follows. The signals output from the DSP block are the same as 1. YSS938: YSS
0dB.
LARGE:
This mode is used with a speaker with high bass reproduction performance (a large unit). Full bandwidth
signals are output.
SMALL:
This mode is used with a speaker with low bass reproduction performance (a small unit). The signals of 90Hz
or less are mixed into the channel specified by LFE/BASS.
NONE:
This mode is used with no center speaker. The center content is reduced by 3dB and distributed to MAIN L/R.
The analog switch settings for each sub-menu are as shown in the table below.
MAIN: SMALL 0dB
MAIN: LARGE -10dB
CENTER: NONE
LFE: BASS:MAIN
Front Mix: 5ch
REAR CENTER: MUTE
REAR L/R: MUTE
Reference data (PRE OUT)
INPUT: DVD ANALOG (Both ch)
VOLUME: -10 dB
Sub-menu
Condition
MAIN L/R CENTER
REAR C
SWFR
RL/RR
1
MAIN: SMALL 0dB
1kHz/90Hz, -20 dBV
-14.0/-17.0 dBV -14.0 dBV -14.0 dBV -5.2 dBV -14.0 dBV
2
MAIN: LARGE -10dB
1kHz, -20 dBV
-24.0 dBV -14.0 dBV -14.0 dBV -5.2 dBV -14.0 dBV
3
CENTER: NONE
1kHz, -20 dBV
-17.5 dBV
-
∞
-14.0 dBV -5.2 dBV -14.0 dBV
4
LFE/BASS: MAIN
50Hz, -20 dBV
-12.5 dBV -17.0 dBV (90Hz) -14.0 dBV
-
∞
-17.0 dBV (90Hz)
5
FRONT MIX: 5CH
1kHz, -20 dBV
-20.0 dBV -14.0 dBV -14.0 dBV -5.2 dBV -14.0 dBV
6
REAR CENTER: MUTE
1kHz, -20 dBV
-14.0 dBV -14.0 dBV
-
∞
-5.2 dBV -14.0 dBV
7
REAR L/R: MUTE
1kHz, -20 dBV
-14.0 dBV -14.0 dBV -14.0 dBV -5.2 dBV
-
∞
26
