RECORDING
38
Recording adjustments and other operations are
performed from the recording components. Refer to the
operating instructions for those components.
1
Turn on the power of this unit and all
connected components.
2
Select the source component you want to
record from.
3
Start playback (or select a broadcast station)
on the source component.
4
Start recording on the recording component.
y
Do a test recording before you start an actual recording.
• When this unit is set in the standby mode, you cannot record
between other components connected to this unit.
• The setting of CONTROL, VOLUME, “SP LEVEL” (page 47)
and the sound field programs does not affect recorded material.
• A source connected to the MULTI CH INPUT jacks of this unit
cannot be recorded.
• [ HTR-5750 only ] S-Video and composite video signals pass
independently through this unit’s video circuits. Therefore,
when recording or dubbing video signals, if your video source
component is connected to provide only an S-Video (or only a
composite video) signal, you can record only an S-Video (or
only a composite video) signal to your VCR.
• [ HTR-5750 ] Digital signals input to the DIGITAL INPUT
jacks are not output to the analog AUDIO OUT (L/R) jacks for
recording. Likewise, analog signals input to the AUDIO IN
(L/R) jacks are not output to the DIGITAL OUTPUT jack.
Therefore, if your source component is connnected to provide
only digital (or analog) signals, you can only record digital (or
analog) signals.
• [ HTR-5740 ] Digital signals input to the DIGITAL INPUT
jacks are not output to the analog AUDIO OUT (L/R) jacks for
recording. You can only record analog signals.
• A given input source is not output on the same REC OUT
channel. (For example, the signal input from VCR IN is not
output on VCR OUT.)
• Check the copyright laws in your country to record from
records, CDs, radio, etc. Recording of copyrighted material may
infringe copyright laws.
■
Special considerations when recording
DTS software
The DTS signal is a digital bitstream. Attempting to
digitally record the DTS bitstream will result in noise
being recorded. Therefore, if you want to use this unit to
record sources that have DTS signals recorded on them,
the following considerations and adjustments need to be
made.
For DVDs and CDs encoded with DTS, when your player
is compatible with the DTS format, follow its operating
instructions to make a setting so that the analog signal will
be output from the player.
RECORDING
VOLUME
AUTO/MAN'L MONO
VIDEO
L AUDIO R
MAN'L/AUTO FM
LEVEL
NEXT
EDIT
EFFECT
MEMORY
FM/AM
PRESET/TUNING
A/B/C/D/E
l
PROGRAM
h
BASS/TREBLE
l
PRESET/TUNING
h
TUNING MODE
INPUT MODE
CONTROL
STRAIGHT
SPEAKERS
PHONES
SILENT CINEMA
STANDBY
/ON
B
A
MULTI CH
INPUT
VIDEO AUX
INPUT
1
2
TRANSMIT
CODE SET
STANDBY
SYSTEM
POWER
CD
MD/CD-R
TUNER
V-AUX
DVD
AMP
POWER
POWER
VOLUME
TV MUTE
TV INPUT
TV VOL
TV CH
AV
TV
VCR
DTV/CBL
MULTI CH IN
SLEEP
1
2
(U.S.A. model)
INPUT
CD
MD/CD-R
TUNER
V-AUX
DVD
AMP
VCR
DTV/CBL
MULTI CH IN
SLEEP
or
Front panel
Remote control
Notes
If you playback a video source that uses scrambled or
encoded signals to prevent it from being dubbed, the
picture itself may be disturbed due to those signals.
00_HTR-5750_U_EN.book Page 38 Tuesday, February 17, 2004 10:29 AM
