49
English
SET MENU
A
D
V
ANCED
OPERA
T
ION
■
Input mode
B)INPUT MODE
Use this feature to designate the input mode for sources
connected to the DIGITAL INPUT jacks when you turn on
this unit (see page 31 for details about the input mode).
Choices:
AUTO
, LAST
• Select AUTO to allow this unit to automatically detect
the type of input signal and select the appropriate input
mode.
• Select LAST to set this unit to automatically select the
last input mode used for that source.
Even if LAST is selected, the last setting for the EX/ES button
will not be recalled.
Use to adjust the optional system parameters.
■
Display set
A)DISPLAY SET
Dimmer
DIMMER
Use to adjust the brightness of the front panel display.
Choices: –4 to
0
Video conversion (HTR-5750 only)
V CONV.
Use this feature to turn on/off conversion of composite
(VIDEO) signals to S-Video signals. This allows you to
output converted video signals from the S VIDEO jacks
when no S-Video signals are input.
Choices:
ON
, OFF
• Select OFF not to convert any signals.
• Select ON to convert composite signals to S-Video
signals.
Converted video signals are only output to the MONITOR OUT
jacks. When recording you must make the same type of video
connections (i.e., S-Video) between each component.
■
Memory guard
B)MEMORY GUARD
Use this feature to prevent accidental changes to DSP
program parameter values and other system settings.
Choices: ON,
OFF
Select ON to protect:
• DSP program parameters
• All SET MENU items
• All speaker levels
When “MEMORY GUARD” is set to ON, you cannot use
the test tone or select any other SET MENU items.
Note
3 OPTION MENU
Note
00_HTR-5750_U_EN.book Page 49 Tuesday, February 17, 2004 10:29 AM
