11
RX-V496/RX-V496RDS/HTR-5240/HTR-5240RDS
●
Selection by using the remote control unit
The remote control codes in the menu list (see right column
on page 8) correspond to the DSP program, test and effect keys.
See the figure on the right.
3. OPERATION AND DISPLAY WHEN STARTING DIAGNOSIS FUNCTION
(1) Selection of diagnostic menu
The diagnostic menu and the sub-menu can be selected by using the front panel keys of the main unit or the remote
control unit.
●
Selection by using the front panel keys of the main unit
The main menu can be changed cyclically by using the "PROGRAM / " keys, and the sub-menu, by using the
"PRESET/TUNING / " keys. The " " key will increase the main or sub-menu number.
(2) Other functions available while diagnosis function is active
Listed below are the other functions available while the diagnosis function is active.
• Selection of the input (include TAPE MONITOR/EXTERNAL DECODER)
• Effect level control (CENTER, REAR, SUBWOOFER)
• Master volume control
• Muting on/off
• Power on/off
(3) Diagnosis default status
When not otherwise specified, default settings and values in each menu are as follows:
• SPEAKERS
: All "LARGE"
• Electronic Volumes
: All "0dB"
• DYNAMIC RANGE
: MAX
• LFE LEVEL
: 0dB (–10dB in AC-3(DOLBY DIGITAL))
• CENTER DELAY
: 0ms
FRONT PANEL
Main menu
Sub-menu
Reverse
Forward
Reverse
Forward
2
TUNER
3
TAPE/MD
1
CD
5
SAT/D-TV
6
VCR
4
DVD/LD
8
AUX
9
EXT.DEC.
7
ENTER
+
10
CLEAR
+
+
100
0
A/B/C/D/E
DISC SKIP
PRESET
EFFECT
CH
TEST
--
CH
7A-91
7A-90
7A-8F
7A-8D
7A-8C
7A-8A
7A-89
7A-8E
7A-8B
7A-88
