PREPARATIONS
➤
Connecting a TV
En
18
❑
Necessary settings
To use HDMI Control and ARC, you need to configure the following settings.
For details on settings and operating your TV, refer to the instruction manual for the TV.
1
After connecting external devices (such as a TV and playback devices)
and the power cable to the unit, turn on the unit, TV, and playback devices.
2
Configure the settings of the unit.
a
Check that ARC is enabled on the TV.
b
Switch the TV input to display video from the unit.
c
Press SETUP.
d
Use the cursor keys to select “HDMI” and press E
N
TER.
e
Press E
N
TER again.
f
Use the cursor keys (
q
/
w
) to select “HDMI Control” and the cursor keys (
e
/
r
) to
select “On” as shown below.
g
Press SETUP.
3
Configure the settings for HDMI Control.
a
Enable HDMI Control on the TV and playback devices (such as HDMI
Control-compatible BD/DVD player).
b
Turn off the TV’s main power and then turn off the unit and playback devices.
c
Turn on the unit and playback devices and then turn on the TV’s main power.
d
Switch the TV input to display video from the unit.
e
Check the following.
On the unit
: The input to which the playback device is connected is selected. If not,
select the input source manually.
On the TV
: The video from the playback device is displayed.
f
Check that the unit is properly synchronized with the TV by turning off the TV or
adjusting the TV volume with the TV remote control.
This completes the necessary settings.
If you select a TV program with the TV remote control, the input source of the unit will be
automatically switched to “AV 4” and the TV audio will be played back on the unit.
If you cannot hear the TV’s audio, check that “ARC” (p.76) in the “Setup” menu is set to
“On”.
• If HDMI Control does not work properly, try turning off and on (or unplugging and then plugging in again)
the devices. It may solve the problem.
• If the unit is not synchronized to the TV’s power operations, check the priority of the audio output setting on
the TV.
• If the audio is interrupted while using ARC, set “ARC” (p.76) in the “Setup” menu to “Off” and use a digital
optical cable to input TV audio to the unit (p.19).
• “AV 4” is set as TV audio input at the factory. If you have connected any external device to the AV 4 jacks,
use “TV Audio Input” (p.75) in the “Setup” menu to change the TV audio input assignment. To use the
SCE
N
E function (p.35), you also need to change the input assignment for SCE
N
E(TV).
RETURN
VOLUME
ENTER
TOP
POP UP
DISPLAY
OPTION
SETUP
RETURN
VOLUME
TOP
POP UP
DISPLAY
OPTION
SETUP
Cursor keys
ENTER
S e t u p
S p e a k e r
H D M I
S o u n d
E C O
F u n c t i o n
N e t w o r k
L a n g u a g e
C o n f i g u r a t i o n
C o n f i g u r a t i o n
H D M I C o n t r o l
A u d i o O u t p u t
S t a n d b y T h r o u g h
T V A u d i o I n p u t
S t a n d b y S y n c
A R C
S C E N E
O n
A u t o
A u t o
A V 4
A u t o
O n
B a c k : R E T U R N
1 2 3
TV connection
4 5 6 7 8 9 10
