•
SET
MENU
TABLE
MAIN
MENU
SUB-MENU
PARAMETER
VALUE [INITIAL VALUE]
Speaker
Configuration
Subwoofer
[Use] / None
Front
[Small] / Large
Center
[Small] / Large / None
Surround
[Small] / Large / None
Crossover
40 Hz / 60 Hz / [80 Hz] / 90 Hz / 100Hz / 110 Hz / 120 Hz / 160 Hz /
200 Hz
Subwoofer Phase
[Normal] / Reverse
Extra Bass
[Off] / On
*
“Extra Bass” is not available when “Subwoofer” is set to “None”, or
when “Front” is set to “Small”.
“Extra Bass” は “Subwoofer:None” または “Front:Small” と
設定した場合、選択不可能
Distance
Unit
Meter / Feet
Front L
0.30 to 24.00 m, [3.00 m], 0.05 m step
Front R
1.0 to 80.0 ft, [10.0 ft], 0.2 ft step
Center
0.30 to 24.00 m, [2.60 m], 0.05 m step
1.0 to 80.0 ft, [8.6 ft], 0.2 ft step
Surround L
0.30 to 24.00 m, [2.40 m], 0.05 m step
Surround R
1.0 to 80.0 ft, [8.0 ft], 0.2 ft step
Subwoofer
0.30 to 24.00 m, [3.00 m], 0.05 m step
1.0 to 80.0 ft, [10.0 ft], 0.2 ft step
Level
Front L
-10.0 to +10.0 dB, [0.0 dB], 0.5 dB step
Front R
Center
Surround L
-10.0 to +10.0 dB, [-1.0 dB], 0.5 dB step
Surround R
Subwoofer
-10.0 to +10.0 dB, [0.0 dB], 0.5 dB step
Equalizer
EQ Select
PEQ / [GEQ] / Off
*
“PEQ” is available only when the YPAO has been performed.
“PEQ”
は自動測定(
YPAO
)実行後のみ選択可能
GEQ Edit
Front L
63 Hz
···········||···········
Front R
160 Hz
···········||···········
Center
400 Hz
···········||···········
Surround L
1 kHz
···········||··········· -6.0 to +6.0 dB, [0 dB], 0.5 dB step
Surround R
2.5 kHz ···········||···········
6.3 kHz ···········||···········
16 kHz
···········||···········
Test Tone
[Off] / On
14
RX-V475/HTR-4066/RX-V500D
RX-V475/HTR-4066/
RX-V50
0D
Summary of Contents for RX-V500D
