3
■
Zone2 setup
Use the supplied remote control to set the Zone2
function.
1
Turn on the unit and TV.
2
S
witch the TV input to display video from
the unit.
3
Press ON
S
CREEN to display the
on-screen menu on the TV.
4
Use the cursor keys and ENTER to select
“
S
etup”
→
“
S
peaker”
→
“Manual
S
etup”
→
“Power Amp Assign”.
5
Use the cursor keys to select
“7ch +1ZONE” and press ENTER.
6
Press ON
S
CREEN to exit from the
on-screen menu.
Controlling Zone2
Follow the procedure below to enable Zone2 output and
select an input source for Zone2.
1
S
et MAIN/ZONE2 to “ZONE2”.
This changes the zone (main zone or Zone2)
that is controlled by the remote control.
2
Press RECEIVER
z
.
Each time you press the key, Zone2 output is
enabled or disabled.
When Zone2 output is enabled, “ZONE2” lights
up in the front display.
3
Use the following keys to select an input
source.
AV 5–6:
AV 5–6 (AUDIO) jacks
AUDIO 1–2:
AUDIO 1–2 jacks
V-AUX:
(RX-A820 only)
VIDEO AUX (AUDIO) jacks (on the front panel)
TUNER:
FM/AM radio
U
S
B:
USB jack (on the front panel)
NET:
NETWORK jack (press repeatedly to
select a desired network source)
• You cannot select USB and network sources exclusively for
each zone. For example, if you select “SERVER” for Zone2
when “USB” is selected for the main zone, the input source for
the main zone also switches to “SERVER”.
4
S
tart playback on the external device or
select a radio station.
For details about the playback operation, refer to
the instruction manual for the external device or
Owner’s Manual on the supplied CD-ROM.
DISPLAY
RETURN
ENTER
ON
SCREEN
OPTION
TOP MENU
POP-UP/MENU
DISPLAY
RETURN
OPTION
TOP MENU
POP-UP/MENU
ON SCREEN
ENTER
Cursor keys
NET
PARTY
HDMI OUT
TUNER
MAIN
ZONE 2
USB
SCENE
SOURCE
RECEIVER
HDMI
AV
AUDIO
5
6
5
V-AUX
1
2
3
4
1
2
1
2
3
4
PARTY
SCENE
SOURCE
RECEIVER
HDMI
AV
5
V-AUX
1
2
3
4
1
2
3
4
HDMI OUT
MAIN/ZONE2
AV 5–6
AUDIO 1–2
TUNER
USB
NET
RECEIVER
z
Zone2On
VOL.
2
ZONE
Lights up
