Graphical user interface (GUI) menu
113
En
Ad
v
a
nce
d
Op
eratio
n
■
Decoder Mode (Default decoder mode)
Use this feature to designate the default decoder mode (see page 97)
for the input sources when you turn on the power of this unit.
■
EXTD Surround
(Default extended surround decoder mode
setting)
Use this feature to designate the extended surround decoder mode
(see page 87) for the input sources connected to the DIGITAL
INPUT jacks when you turn on the power of this unit.
■
Memory Guard (Memory guard)
Use this feature to prevent accidental changes to sound field
program parameter values and other system settings.
y
When you select the protected parameter, “
” appears at the bottom left of
the GUI screen. You can adjust the parameters when you select the
parameter and “
” does not appear at the bottom left of the GUI menu even
if “Memory Guard” is set to “On”.
■
HDMI Set (HDMI settings)
Use this feature to adjust the HDMI support audio.
Support Audio (Support audio)
Use this feature to select whether to play back HDMI audio signals
on this unit or on another HDMI component connected to the
HDMI OUT jacks on the rear panel of this unit.
Available audio/video signals depend on the specification of the connected
video monitor. Refer to the instruction manual of each connected
component.
Standby Through (Standby through)
Use this feature whether this unit allows the HDMI signals input at
the HDMI IN jacks to pass thorough this unit when this unit is in the
standby mode. You can also designate an HDMI IN jack and an
HDMI OUT jack that accept the signals when “Standby Through” is
set to “On” and this unit is in the standby mode.
• When “Standby Through” is set to “On” and this unit is in the standby
mode, the audio signals are only output at the HDMI OUT 1 or HDMI
OUT 2.
• When “Standby Through” is set to “On”, the amount of power
consumption in the standby mode is increase.
Input/output jack select
When “Standby Through” is set to “On”, you can designate an
HDMI IN jack and an HDMI OUT jack that accept the signals when
this unit in in the standby mode.
Input (HDMI IN jack select)
Use this feature to select an HDMI IN jack select that accepts
HDMI signals when this unit is in the standby mode.
Output (HDMI OUT jack select)
Use this feature to select an HDMI OUT jack select that
outputs HDMI signals when this unit is in the standby mode.
Choice
Functions
Automatically detects the type of input signals and select
the appropriate decoder mode setting.
Automatically selects the last decoder mode setting used
for the connected input source.
Choice
Functions
Automatically detects the input digital audio signals and
activates the appropriate decoder.
Selects the last selected extended surround decoder
mode.
Choice
Functions
Turns off the “Memory Guard” feature.
Protects the following parameters:
– sound field program parameters
– GUI menu parameters
– speaker levels settings
Choice
Functions
Plays back HDMI audio signals on this unit. The HDMI
audio signals input at the HDMI input jacks of this unit
are not output to the HDMI component connected to the
HDMI OUT jacks on the rear panel of this unit.
Plays back HDMI audio signals on another HDMI
component connected to the HDMI OUT jacks.
Note
Choice
Functions
Does not accept the HDMI signals when this unit is in
the standby mode.
Accepts the HDMI signals when this unit is in the
standby mode.
Notes
Choice
Selected HDMI IN jack
HDMI IN1
HDMI IN2
HDMI IN3
HDMI IN4
Front HDMI IN
Choice
Selected HDMI OUT jack
HDMI OUT1
HDMI OUT2