Advanced setup
144
En
■
Parameter initialization
Use this feature to reset the parameters of this unit to the initial
factory settings. You can select the category of parameters to be
initialized.
• Use “Initialize” in the sound field program menu to initialize the
parameters of the desired program (see page 95).
• When the network settings are reset, “DHCP” in “Network” is
automatically set to “On” (see page 111) and the registered client ID of
this unit on your Yamaha MCX-2000 is cleared (see page 82).
■
MAC address filter
Use this feature to filter the access to this unit via LAN to control
this unit by the MAC address of the accessing PC (see page 120).
y
You can register the MAC address that is allowed to access when “MAC
FILTER” is set to “ON” by using the Web browser (see page 120).
■
TV format
Use this feature to set the color encoding format of your television.
Choices: NTSC, PAL
Initial setting:
[U.S.A., Canada, General and Korea models]: NTSC
[Other models]: PAL
This setting is applied to the video monitor in the main zone, Zone 2, Zone
3, and Zone 4.
■
HDMI monitor check
Use this feature to activate or deactivate the monitor check function
of this unit.
■
Language
Use this feature to select the language of your choice that appears in
the GUI (graphical user interface) menu, OSD display in the zone
monitor and the messages that appear in the front panel display.
Choices:
(English), JAPANESE (Japanese), FRENCH
(French), GERMAN (German), SPANISH (Spanish),
RUSSIAN (Russian)
You can also select the language setting by using GUI menu. See page 114
for details.
··· The selected language is displayed.
— ··· The selected language is not displayed. The menu items and
messages are displayed in English.
See page 142 for the operation of the advanced setup.
Choice
Descriptions
Select this setting to initialize all the parameters of
the sound field parameters (see page 91).
Select this setting except “Short Message” and
“On Screen” (see page 108).
Select this setting except “Short Message” and
“On Screen” (see page 108).
Select this setting to initialize all the parameters of
this unit.
Select this setting to cancel the initialization
procedure.
Notes
Choice
Descriptions
Only allows to accept the access from the PC whose
MAC address is registered to this unit.
Allows to accept the access from any PC.
Note
Choice
Descriptions
This unit receives the information of the available video
signal resolutions from the video monitor connected via
HDMI and you can only select the resolutions supported
by the video monitor in “HDMI Resolution” (see
page 107).
You can select any resolution in “HDMI Resolution”.
Note
GUI menu
Front panel
display
—
—
—
Other languages
