Connections
45
En
Prepara
tion
D
DSP indicators
The respective indicator lights up when any of the sound field
programs are selected.
CINEMA DSP HD indicator
Lights up when you select a CINEMA DSP or HiFi DSP sound
field program (see page 58).
HD³ indicator
Lights up when the CINEMA DSP HD³ mode is active (see
page 64).
E
VIRTUAL indicator
Lights up when the Virtual CINEMA DSP mode is active (see
page 64).
F
YPAO indicator
Lights up when you run “Auto Setup” and when the speaker
settings set in “Auto Setup” are used without any modifications (see
page 46).
G
ENHANCER indicator
Lights up when the Compressed Music Enhancer mode is selected
(see page 63).
H
PRE AMP indicator
Lights up when this unit is in the pre-amplifier mode (see
page 143).
I
SILENT CINEMA indicator
Lights up when headphones are connected and a sound field
program is selected (see page 64).
J
SLEEP indicator
Lights up while the sleep timer is on (see page 56).
K
VOLUME level indicator
Indicates the current volume level.
y
When the audio output is muted, the VOLUME level indicator flashes (see
page 54).
L
Input channel and speaker indicators
Input channel indicators
• Indicate the channel components of the current digital input
signal.
• Light up or flash according to the settings of the speakers
when this unit is in the auto setup procedure (see page 46) or
the speaker level setting procedure in the “Speaker Level”
(see page 102).
Presence speaker indicators
Light up according to setting for “Front Presence” and “Rear
Presence” (see page 100) in “Speaker Set” when this unit is in
the auto setup procedure (see page 46) or the speaker level
setting procedure in the “Speaker Level” (see page 102).
y
You can make settings for the presence and surround back speakers
automatically by running “Auto Setup” (see page 46) or manually by
adjusting settings for “Front Presence”, “Rear Presence” (see
page 100), and “Surround Back” (see page 100) in “Speaker Set”.
M
Tuner indicators
Lights up when this unit is in the FM, AM or XM Satellite Radio
tuning mode.
TUNED indicator
Lights up when this unit is tuned into a station (see page 68).
STEREO indicator
Lights up when this unit is receiving a strong signal for an FM
stereo broadcast while the AUTO indicator is lit (see page 68).
AUTO indicator
Lights up when this unit is in the automatic tuning mode (see
page 68).
MEMORY indicator
Flashes to show that a station can be stored (see page 70).
y
MEMORY indicator also flashes while this unit is in the shortcut
memory preset mode of Network (see page 84).
HD indicator (U.S.A. model only)
Lights up when this unit is tuned into the HD Radio reception
band.
N
ZONE2/ZONE3/ZONE4 indicators
Lights up when Zone 2, Zone 3, or Zone 4 is turned on
(see page 133).
Presence speaker indicators
Input channel indicators
C
R
L
LFE
SR
SL
FPR
SB SBR
SBL
RPR