Graphical user interface (GUI) menu
94
En
■
Stereo program parameter descriptions
■
Compressed Music Enhancer mode parameter descriptions
Reverberation level. Adjusts the volume of the reverberation sound. The larger the value, the stronger the reverberation
becomes.
Control range: 0 to 100%
Sound field parameter
Features
(“2ch Stereo” only)
2-channel stereo direct. Bypasses the decoders and DSP processors of this unit for pure hi-fi stereo sound when playing 2-
channel analog sources.
y
• Select “Auto” to bypass the decoders, DSP processors and the tone control circuitry only when “BASS” and “TREBLE”
are set to “BYPASS” (see page 65).
• Select “Off” not to bypass the decoders, DSP processors and the tone control circuitry when “BASS” and “TREBLE”
are set to “BYPASS”.
• When multi-channel signals are input, they are downmixed to 2 channels and output from the front left and right
speakers.
• The low-frequency signals of the front left and right channels are redirected to the subwoofer in the following cases:
– “Bass Out” is set to “Front & SWFR” (see page 101).
– “Front” is set to “Small” (see page 99) and “Bass Out” is set to “SWFR” (see page 101).
(“11ch Stereo” only)
11-channel stereo center, surround left, surround right, surround back, presence left and presence right levels. Adjusts the
volume level of each channel in the 11-channel stereo mode. The available parameters differ depending on the speaker
settings.
Control range: 0 to 100%
The Compressed Music
Enhancer mode
Features
(“Straight Enhancer” and
“11ch Enhancer” only)
Straight enhancer or 11-channel enhancer effect level. Select “High” or “Low” to adjust the effect for the high-frequency.
Sound field parameter
Features
Source sound
L
eve
l
Rev. Level
Time
