24
En
Optimizing the speaker setting for your listening room
6
Press
D
ENTER
to display the setup results
in detail.
7
Press
D
l
/
h
repeatedly to toggle between
the setup result displays.
y
If you are not satisfied with the results or want to manually
adjust each parameter, run “MANUAL SETUP” (see
page 49).
The distances displayed in the “DISTANCE” results may be
longer than the actual distance depending on the
characteristics of your speakers.
8
Press
D
ENTER
to return to the
“AUTO:RESULT” display.
9
Make sure the pointer is pointing at “SET”
and “CANCEL” and then press
D
l
/
h
to
select “SET” or “CANCEL”.
Choices:
SET
, CANCEL
• Select “SET” to confirm the “AUTO SETUP”
results.
• Select “CANCEL” to cancel the “AUTO SETUP”
results.
10
Press
D
ENTER
to confirm your selection.
The top “SET MENU” display appears in the OSD.
11
Press
N
SET MENU
to exit from “SET
MENU”.
12
Disconnect the optimizer microphone from
this unit.
The optimizer microphone is sensitive to heat. Keep it
away from direct sunlight and do not place it on top
of this unit.
y
If you change speakers, speaker positions, or the layout of
your listening environment, run “AUTO SETUP” again to
recalibrate your system.
Note
Results of the speaker
connection and wiring
Results of the speaker
distance from the
listening position
Results of the speaker
size
Results of the speaker
output level
AUTO:RESULT
NO WARNING
RESULT
SP
:
3/2/0.1
DIST:
3.2/3.5m
LVL :
-2/+2dB
.
SET
CANCEL
[ ]/[ ]:Up/Down
[ENTER]:Enter
>
SET MENU
TOP MENU
. ;
AUTO SETUP
;
MANUAL SETUP
.
A
;
SIGNAL INFO
[ ]/[ ]:Up/Down
[ENTER]:Enter
p
p
