background image

32

 En

Playback

Enjoying pure hi-fi stereo sound

The DIRECT STEREO mode allows sources to bypass the 
decoders and DSP processors of this unit so that you can 
enjoy pure hi-fi sound from 2-channel PCM and analog 
sources.

Press 

C

DIRECT STEREO

 (or set the operation 

mode selector (

K

) to 

AMP

 and then press 

T

DIRECT ST.

) to select “DIRECT STEREO”.

• To avoid unexpected noise, do not play CDs encoded in DTS 

when the DIRECT STEREO mode is selected.

• When multi-channel signals (Dolby Digital and DTS) are input, 

this unit automatically switches to the corresponding analog 
input.

• No sound will be output from the subwoofer.
• “TONE CONTROL” (see page 30) and “SOUND MENU” (see 

page 51) settings (except for speaker level settings) are not 
effective.

• The front panel display automatically dims.

Adjusting the tonal quality

Press 

0

TONE CONTROL

 repeatedly to select 

“BASS” or “TREBLE” and then press 

A

PROGRAM

 

l

 / 

h

 to adjust the corresponding 

frequency response level.

• Select “BASS” to adjust the low-frequency response.
• Select “TREBLE” to adjust the high-frequency 

response.

• Speaker and headphone adjustments are stored independently.
• If you increase or decrease the high-frequency or low-frequency 

sound to an extreme level, the tonal quality of the surround 
speakers may not match that of the front left and right speakers.

Adjusting speaker levels during 
playback

You can adjust the output level of each speaker while 
listening to a music source.

This operation will override the level adjustments made in 
“AUTO SETUP” (see page 22) and “SP LEVEL” (see page 53).

1

Set the operation mode selector (

K

) to 

AMP

 

and then press 

C

LEVEL

 repeatedly to 

select the speaker you want to adjust.

y

Once you press 

C

LEVEL on the remote control, you can 

also select the speaker by pressing 

D

k

 / 

n

.

2

Press 

D

l

 / 

h

 on the remote control to 

adjust the speaker output level.

The control range is from +10 dB to –10 dB.

y

You can press 

4

 

A/B/C/D/E

 to select a speaker and then 

5

 

PRESET/TUNING/CH

 

l

 / 

h

to adjust the speaker output level.

Notes

Notes

Note

Display

Adjusted speaker

FRONT L

Front left speaker

FRONT R

Front right speaker

CENTER

Center speaker

SUR.L

Surround left speaker

SUR.R

Surround right speaker

SWFR

Subwoofer

Summary of Contents for RXV461BL






























































































Reviews: