37
En
Sound field programs
English
BA
S
IC
OPERA
T
ION
■
Editing sound fields parameters
You can enjoy good quality sound with the factory preset
parameters. Although you do not have to change the initial
settings, you can change some of the parameters to better
suit the input source or your listening room.
1
While listening to a source, set the operation
mode selector (
K
) to
AMP
and then press
D
k
/
n
to select the desired parameter.
2
Press
D
l
/
h
to change the parameter
value.
You cannot change parameter values when “MEMORY GUARD”
in “OPTION MENU” is set to “ON” (see page 58).
y
Initial settings are indicated in bold under each parameter.
For Pop/Rock, Hall, Jazz, Game, TV Sports,
Movie Spacious and Movie Dramatic:
DSP level
DSP LEVEL
Function:
Adjusts the effect level.
Choices:
MIN,
MID
, MAX
For PRO LOGIC II Music:
Panorama
PANORAMA
Function:
Sends stereo signals to the surround
speakers as well as the front speakers for
a wraparound effect.
Choices:
OFF
, ON
Dimension
DIMENSION
Function:
Gradually adjusts the sound field either
towards the front or towards the rear.
Control range: –3 (towards the rear) to +3 (towards the
front), initial setting is STD (standard).
Center width
CT WIDTH
Function:
Adjusts the center image from all three
front speakers to varying degrees. A
larger value adjusts the center image
towards the front left and right speakers.
Control range: 0 (center channel sound is output only
from center speaker) to 7 (center channel
sound is output only from front left and
right speakers), initial setting is 3.
For Music Enh. 2ch and Music Enh. 5ch
Effect level
Function:
Adjusts the effect level.
Choices:
LOW,
HIGH
Note
