96
SET MENU
■
Zone set
D)MULTI ZONE SET
Use this feature to specify the location of speakers
connected to the SPEAKERS B terminals of this unit.
Speaker B setting
SP B
Use this feature to select the location of the front speakers
connected to the SPEAKERS B terminals.
Choices:
FRONT
, ZONE B
• Select “FRONT” to turn on or off SPEAKERS A and B
when the speakers connected to the SPEAKERS B
terminals are set in the main zone.
• Select “ZONE B” if the speakers connected to the
SPEAKERS B terminals are set in another zone. If
SPEAKERS A is turned off and SPEAKERS B is
turned on, all the speakers including the subwoofer in
the main zone are muted and this unit outputs sound at
the SPEAKERS B terminals only.
• If you connect headphones to the PHONES jack of this unit, the
sound is output from both headphones and the SPEAKERS B
terminals when “SP B” is set to “ZONE B”.
• If a DSP program is selected when “SP B” is set to “ZONE B”,
this unit automatically enters the Virtual CINEMA DSP mode
(see page 50).
Zone 2 amplifier
ZONE2 AMP
Use this feature to select either the external or the internal
amplifier to amplify the Zone 2 speakers.
Choices: INT,
EXT
• Select “INT” (internal amplifier) to use the internal
amplifier of this unit if you connected your Zone 2
speakers directly to the PRESENCE/ZONE2 speaker
terminals of this unit.
• Select “EXT” (external amplifier) if you do not use the
Zone 2 speakers or if you connected your Zone 2
speakers to the external amplifier in Zone 2 connected
to the ZONE 2 OUTPUT jacks of this unit.
■
XM Radio setting
E)XM RADIO SET
(U.S.A. model only)
XM Radio information display time
XM DISPLAY
Use this feature to set the time to display the XM Satellite
Radio information in the OSD after pressing DISPLAY on
the front panel or on the remote control.
Choices: ON,
10S
, 30S, OFF
• Select “ON” to display the XM Satellite Radio
information while this unit is tuned into a channel.
• Select “10S” to display the XM Satellite Radio
information for 10 seconds.
• Select “30S” to display the XM Satellite Radio
information for 30 seconds.
• Select “OFF” not to display the XM Satellite Radio
information.
XM Radio antenna
XM ANTENNA
Use this feature to check the current reception level of the
XM Connect-and-Play digital antenna accessory
connected to the XM jack of this unit (see page 59). For
the best reception, orient the XM Connect-and-Play digital
antenna accessory so that a value of 60% or more is
displayed here.
Display status: NONE, 0 to 100%
• “NONE” is displayed if the XM Connect-and-Play digital antenna
accessory is not connected to this unit. In this case, check the
antenna connections (see page 59).
• The “XM ANTENNA” parameter cannot be adjusted by using
the remote control. Instead, you need to adjust the orientation of
the XM Connect-and-Play digital antenna accessory connected
to the XM jack of this unit for a better percentage of the
reception level.
XM Radio information display scroll
SCROLL
Use this feature to set whether to display the XM Satellite
Radio information in the front panel display in a
continuous manner or by 14 alphanumeric characters at
once (see page 68).
Choices:
CONT
, ONCE
• Select “CONT” to display the XM Satellite Radio
information in the front panel display in a continuous
manner.
• Select “ONCE” to display the XM Satellite Radio
information in the front panel display by 14
alphanumeric characters at once.
Notes
.
SPB
;;;;;;;
FRONT
ZONE2 AMP
;;;;
EXT
[<]/[>]:Select
[ENTER]:Return
D)MULTI ZONE
SET
SPB
;;;;;;;
FRONT
.
ZONE2 AMP
;;;;
EXT
[<]/[>]:Select
[ENTER]:Return
D)MULTI ZONE
SET
Notes
E)XM RADIO SET
.
XM DISPLAY
;;;
10S
XM ANTENNA
;;
NONE
SCROLL
;;;;;;
CONT
[<]/[>]:Select
[ENTER]:Return
