105
USING MULTI-ZONE CONFIGURATION
AD
V
A
N
C
ED
OPERA
T
ION
■
Using the external amplifier
To use the external amplifiers in Zone 2, select “EXT” in “ZONE2 AMP” (see page 96).
• When you do not use the main zone, press MAIN ZONE ON/OFF on the front panel to turn off the main zone. Adjust the volume
control on the amplifier in the second zone.
• To avoid unexpected noise, DO NOT USE the Zone 2 feature with CDs encoded in DTS.
■
Using the internal amplifier of this unit
To use the internal amplifiers of this unit, select “INT” in “ZONE2 AMP” (see page 96).
Notes
REMOTE OUT
AUDIO IN
VIDEO IN
MONITOR OUT
SP OUT
REMOTE IN
ZONE 2 OUTPUT
MAIN ZONE
ZONE 2
Infrared signal emitter
DVD player
Amplifier
Remote control
Infrared signal receiver
Second zone
Main zone
This unit
IMPORTANT SAFETY NOTICE
The PRESENCE/ZONE2 speaker terminals of this Receiver should not be connected to a Passive Loudspeaker
Selector Box or more than one loudspeaker per channel.
Connection to a Passive Loudspeaker Selector Box or multiple speakers per channel could create an abnormally low
impedance load resulting in amplifier damage. See this owner’s manual for correct usage.
Compliance with minimum speaker impedance information for all channels must be maintained at all times. This
information is found on the back panel of your Receiver.
PRESENCE/ZONE 2
Second zone
This unit
Main zone
