CONTROLS AND FUNCTIONS
5
INTR
ODUCTION
8
MEMORY (MAN’L/AUTO FM)
Stores a preset station in the memory. Hold down this
button for more than 3 seconds to start automatic preset
tuning (see page 54).
9
TUNING MODE (AUTO/MAN’L)
Switches between automatic tuning (the AUTO indicator
is turned on) and manual tuning (the AUTO indicator is
turned off) (see page 52).
0
ZONE 2 ON/OFF
Turns on Zone 2 or sets it to the standby mode
(see page 106).
This button is operational only when MASTER ON/OFF is
pressed inward to the ON position.
A
ZONE CONTROL
Switches the zone you want to control between the main
zone and Zone 2 (see page 106).
y
When Zone 2 is selected, the ZONE2 indicator flashes in the front
panel display for approximately 5 seconds. While the indicator is
flashing, perform the desired operation.
B
VOLUME
Controls the output level of all audio channels.
y
This does not affect the AUDIO OUT (REC) level.
C
PHONES (SILENT CINEMA) jack
Outputs audio signals for private listening with
headphones (see page 40).
• When you connect headphones, no signals are output at the
speaker terminals.
• All Dolby Digital and DTS audio signals are mixed down to the
left and right headphone channels.
D
SPEAKERS A/B
Turns on or off the set of front speakers connected to the
FRONT A and/or B terminals on the rear panel each time
the corresponding button is pressed.
E
PRESET/TUNING, EDIT
• Switches the function of PRESET/TUNING/CH
l
/
h
between selecting preset station numbers and
selecting the tuning frequency.
• Edits the assignments of preset stations (see page 57).
F
STRAIGHT (EFFECT)
Turns the sound field programs off or on. When the
“STRAIGHT” mode is selected, 2-channel or multi-
channel input signals are output directly from their
respective speakers without effect processing (see
page 45).
G
FM/AM
Switches the reception band between FM and AM when
“TUNER” is selected as the input source (see page 52).
H
PROGRAM selector
Selects sound field programs or adjusts the bass/treble
balance in conjunction with TONE CONTROL (see
page 39).
I
TONE CONTROL
Adjusts the bass/treble balance of the front left and right,
center, presence left and right and subwoofer channels in
conjunction with the PROGRAM selector
(see page 39).
J
INPUT MODE
Selects either digital or analog input signals exclusively or
sets this unit to automatically detect the type of input
signals and select the corresponding input signals when
one component is connected via both digital and analog
connections (see page 41).
K
INPUT selector
Selects the desired input source.
L
MULTI CH INPUT
Selects the component connected to the MULTI CH
INPUT jacks as the input source (see page 44).
The input source connected to the MULTI CH INPUT jacks takes
priority over the source selected with the INPUT selector on the
front panel (or the input selector buttons on the remote control).
M
PURE DIRECT
Turns on or off the Pure Direct mode (see page 45).
N
VIDEO AUX jacks
Input audio and video signals from a portable external
source such as a game console or a video camera
(see page 27).
y
To reproduce the source signals input at these jacks, select
“V-AUX” as the input source.
The audio signals input at the DOCK terminal on the rear panel
take priority over the ones input at the VIDEO AUX jacks.
Note
Notes
Note
Note
