91
SET MENU
AD
V
A
N
C
ED
OPERA
T
ION
■
Low-frequency effect level
E)LFE LEVEL
Use this feature to adjust the output level of the LFE (low-
frequency effect) channel according to the capacity of
your subwoofer or headphones. The LFE channel carries
low-frequency special effects which are only added to
certain scenes. This setting is effective only when this unit
decodes Dolby Digital or DTS signals.
Control range: –20 to
0
dB
Control step: 1 dB
Speaker
SPEAKER
Adjusts the speaker LFE level.
Headphone
HEADPHONE
Adjusts the headphone LFE level.
Depending on the settings of “LFE/BASS OUT” (see page 88),
some signals may not be output at the SUBWOOFER OUTPUT
jack.
■
Dynamic range
F)DYNAMIC RANGE
Use this feature to select the amount of dynamic range
compression to be applied to your speakers or
headphones. This setting is effective only when this unit is
decoding Dolby Digital and DTS signals.
Speaker
SP
Adjusts the speaker compression.
Headphone
HP
Adjusts the headphone compression.
Choices: MIN, STD,
MAX
• Select “MIN” (minimum) if you regularly listen at low
volume levels.
• Select “STD” (standard) for general use.
• Select “MAX” (maximum) to preserve the greatest
amount of dynamic range.
■
Audio settings
G)AUDIO SET
Use this feature to adjust the overall audio settings of this
unit.
Muting type
MUTING TYPE
Use this feature to adjust how much the mute function
reduces the output volume (see page 40).
Choices:
FULL
, –20dB
• Select “FULL” to completely mute all the audio
output.
• Select “–20dB” to reduce the current volume by 20 dB.
Audio delay
AUDIO DELAY
Use this feature to delay the sound output and synchronize
it with the video image. This may be necessary when
using certain LCD monitors or projectors.
Control range:
0
to 160 ms
Control step: 1 ms
Tone bypass
TONE BYPASS
Use this feature to select whether audio output bypasses
tone control circuitry when “TREBLE” and “BASS” are
set to 0 dB (see page 39).
Choices:
AUTO
, OFF
• Select “AUTO” if you want signals to bypass tone
control circuitry to provide the purest signal possible.
• Select “OFF” if you do not want signals to bypass tone
control circuitry.
Note
.
SPEAKER
;;;;;;
0dB
HEADPHONE
;;;;
0dB
[]/[]:Up/Down
[<]/[>]:Adjust
E)LFE LEVEL
p
p
.
SP:MINSTD>MAX
HP:MINSTD>MAX
[]/[]:Up/Down
[<]/[>]:Select
F)DYNAMIC RANGE
p
p
.
MUTING TYPE
;
FULL
AUDIO DELAY
;;
0ms
TONE BYPASS
;
AUTO
[]/[]:Up/Down
[<]/[>]:Select
G)AUDIO SET
p
p
