14
Control Set Destination Parameter
No.
LCD
Parameter
00
off
:off
01
Volume
Voice Volume
02
RevSend
Reverb Send
03
ChoSend
Chorus Send
04
INS1-P1:EF1
Insertion Effect 1 Parameter 1
:
:
:
13
INS1P10:EF1
Insertion Effect 1 Parameter 10
14
INS2-P1:EF2
Insertion Effect 2 Parameter 1
:
:
:
29
INS2P16:EF2
Insertion Effect 2 Parameter 16
30
CLFOSpd
Common LFO Speed
31
CLFO-D1
Common LFO Depth1
32
CLFO-D2
Common LFO Depth2
33
PorTime
Common Portamento Time
34
ELM-Lvl
Element Level
35
ELM-Pan
Element Pan
36
ELM-Dly
Element Key On Delay
37
ELFOSpd
Element LFO Speed
38
ELFO-PM
Element LFO Pitch Modulation Depth
39
ELFO-AM
Element LFO Amplitude Modulation Depth
40
ELFO-FM
Element LFO Filter Modulation Depth
41
PCH-Crs
Element Pitch Coarse
42
PCH-Fin
Element Pitch Fine
43
PEG-Dpt
Element Pitch EG Depth
44
PEG-Hld
Element Pitch EG Hold Time
45
PEG-Atk
Element Pitch EG Attack Time
46
PEG-D1
Element Pitch EG Decay1 Time
47
PEG-D2
Element Pitch EG Decay2 Time
48
PEG-Rel
Element Pitch EG Release Time
49
AEG-Atk
Element Amplitude EG Attack Time
50
AEG-D1
Element Amplitude EG Decay1 Time
51
AEG-D2
Element Amplitude EG Decay2 Time
52
AEG-Rel
Element Amplitude EG Release Time
53
FEG-Dpt
Element Filter EG Depth
54
FEG-Hld
Element Filter EG Hold Time
55
FEG-Atk
Element Filter EG Attack Time
56
FEG-D1
Element Filter EG Decay1 Time
57
FEG-D2
Element Filter EG Decay2 Time
58
FEG-Rel
Element Filter EG Release Time
59
FLT-Frq
Element Filter Cutoff Frequency
60
FLT-Rez
Element Filter Resonance
61
HPF-Frq
Element Filter HPF Cutoff Frequency
The destionation parameters 00 - 29 can be used for all Controller Sets.
However, in the case of the Plug-in voices, only the parameters 00 - 13 are
available.
The parameters 30 - 61 are available for the Normal voices except for the
Plug-in voices.
The parameters 04 - 29 are available only when Insertion effect is applied to
the voice, and the effective parameter type differs depending on the
currently selected effect type. If the destination parameter is effective, it's
actual parameter name will be displayed on the LCD. For example,
“INS1P10” of the number 13 will be replaced with the actual parameter
name. If not, the LCD displays the one like “INS1P10” shown in the above
list in the Controller Set function, and “-----” in the Play mode.
As to the parameters 16 - 25 and 28 - 37, the effective parameter type
differs depending on the currently selected effect type. If the destination
parameter is effective, it's actual parameter name will be displayed on the
LCD. For example, “REV-P10” of the number 25 will be replaced with the
actual parameter name. If not, the LCD displays the one like “REV-P10”
shown in the above list in the Controller Set function, and “-----” in the Play
mode.
System Controller Destination Parameter
00
off
off
01
EQLow-G
MEQ Low Gain
02
EQLow-F
MEQ Low Frequency
03
EQLow-Q
MEQ Low Q
04
EQLoM-G
MEQ Low Mid Gain
05
EQLoM-F
MEQ Low Mid Frequency
06
EQLoM-Q
MEQ Low Mid Q
07
EQMid-G
MEQ Mid Gain
08
EQMid-F
MEQ Mid Frequency
09
EQMid-Q
MEQ Mid Q
10
EQHiM-G
MEQ High Mid Gain
11
EQHiM-F
MEQ High Mid Frequency
12
EQHiM-Q
MEQ High Mid Q
13
EQHi-G
MEQ High Gain
14
EQHi-F
MEQ High Frequency
15
EQHi-Q
MEQ High Q
16
REV-P1
ReverbParameter 1
:
:
:
25
REV-P10
Reverb Parameter 10
26
REV-Rtn
Reverb Return
27
REV-Pan
Reverb Pan
28
CHO-P1
Chorus Parameter 1
:
:
:
37
CHO-P10
Chorus Parameter 10
38
CHO-Rtn
Chorus Return
39
CHO-Pan
Chorus Pan
40
Cho>Rev
Send Chorus To Reverb
41
ARP-Typ
Arpeggio Type
42
ARP-Unt
Arpeggio Unit Multiply
43
ARP-Vel
Arpeggio Velocity Rate
44
ARP-Gat
Arpeggio Gate Time Rate
45
Tempo
Arpeggio/Sequencer Tempo
46
EG-Atck
QED EG Attack Time
47
EG-Decy
QED EG Decay Time
48
EG-SusL
QED EG Sustain Level
49
EG-Rele
QED EG Release Time
50
Cutoff
QED Cutoff Frequency
51
Reso
QED Resonance
No.
LCD
Parameter
Control List
S30_DL.qx 3/14/00 5:32 PM Page 14
