16
S412V/S112
Using the S412V/S112
■
Connecting
1.
Turn the amp’s power OFF and set the volume
to “0”.
* Connecting the speaker with the power ON or the vol-
ume turned up may result in damage to the speaker
or amp.
2.
Using the supplied speaker cord, connect the
phone jack located on the back of the S412V/
S112 cabinet to the amp head’s speaker out-
put jack (the SPEAKER jack on the DG Series
Amplifier).
The S412V is a speaker enclosure equipped with four Celestion “Vin-
tage 30” speakers.
* The power rating is 240 W. Use an amp head with a power
output of less than 240 W.
* The impedance is 8
Ω
. Check the amp head’s impedance and
make sure it meets the speaker’s requirements.
* If you use more than two speakers, make sure the total im-
pedance meets the amp head’s requirements. See “Connect-
ing Speakers” section on page 8.
The S112 is a speaker enclosure equipped with a Celestion “G12H-
100” speaker.
* The power rating is 100 W. Use an amp head with a power
output of less than 100 W.
* The impedance is 8
Ω
. Check the amp head’s impedance and
make sure it meets the speaker’s requirements.
* If you use more than two speakers, make sure the total im-
pedance meets the amp head’s requirements. See “Connect-
ing Speakers” section on page 8.
■
Specifications
Speakers
30 cm speaker (Celestion “Vintage 30”) x 4
Power Rating
240 W
Impedance
8
Ω
Dimensions
765 x 820 x 359 mm
(WxHxD)
(30.1” x 32.2” x 14.1”) (w/casters)
Weight
44.0 kg (97 Ibs) (w/casters)
Accessory
Speaker Cable
●
Speaker
Speaker Size
30 cm (12”)
Voice Coil Size
44ø mm
Magnet
Ferrite 1.42 kg (50 oz)
Frequency Range
70 Hz – 5 kHz
Sensitivity
100 dB (1 m/W)
Power Rating
60 W (RMS)
Nominal Impedance
8
Ω
Fundamental Frequency
70 Hz
* Specifications and external appearance are subject to change without notice.
■
Specifications
Speaker
30 cm speaker (Celestion “G12H-100”) x 1
Power Rating
100 W
Impedance
8
Ω
Dimensions
542 x 510 x 284 mm
(WxHxD)
(21.3” x 20” x 11.2”)
Weight
16.0 kg (35 Ibs 4.4 oz)
Accessory
Speaker Cable
●
Speaker
Speaker Size
30 cm (12”)
Voice Coil Size
44ø mm
Magnet
Ferrite 1.42 kg (50 oz)
Frequency Range
82 Hz – 5.5 kHz
Sensitivity
100 dB (1 m/W)
Power Rating
100 W (RMS)
Nominal Impedance
8
Ω
Fundamental Frequency
82 Hz
* Specifications and external appearance are subject to change without notice.
Summary of Contents for S112
Page 84: ...Printed in Japan V543190...